01989nam a2200265 a 4500001001400000003000700014005001700021008004100038020002200079039007500101040000800176090002800184100002400212245010400236260003400340300005600374502010000430504003000530520077700560650003001337952012201367952013201489999002501621999007701646vtls000078139KUKTEM20251114204556.0140509t2013    my a   f m    000 0 eng d  aTHE0006434(Local) 9a201905131524bamirulc201405090943dtraining3y201405090940ztraining3  aUMP  aTJ857 . A55 2013 rs Bc.0 aAnis Syarliza Ahmad10aModeling, simulation and experimental verification of hydraulic servo system /cAnis Syarliza Ahmad  aKuantan, Pahang :bUMP,c2013  axvi,47 p. :bill. (some col.) ;c30 cm. +e1 CD-ROM  aProject paper (Bachelor of Engineering in Manufacturing) -- Universiti Malaysia Pahang – 2013  aa Bibliography : p. 46-473 aThe aim of this project is to model, simulate and analyze the performance of the hydraulic servo system using MATLAB and Simulink. Experiments were conducted using open loop and closed loop control. In open loop control, the experiment was conducted for various speeds by supplying voltage to actuator from 5V to 10V. The open loop experimental data were used to determine the transfer function of the system. In closed loop control, the PI, PD and PID controllers were implemented in the hydraulic servo system and the desired positions were set to 30 mm, 50 mm and 70 mm. The results of the closed loop control showed that the PID controller produced better performance. The results also indicate that the transfer function model represented the actual system very well. 0aHydraulic servomechanisms  00104071a20000b20000d2019-09-04l0oTJ857 . A55 2013 rs Bc.p0000080218r2019-09-04 00:00:00t1w2019-09-04yPSM  00104071a20000b20000d2019-09-04l0oCD 7722 | TJ857 . A55 2013 rs Bc.p0000080219r2019-09-04 00:00:00t1w2019-09-04yPSM  aVIRTUA40c4372d4378  aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*9992