01558nam a2200193 a 4500001001400000003000700014005001700021008004100038020002200079040000800101100003200109245012900141260003400270300005700304502009500361504002800456520086100484650001901345vtls000078472KUKTEM20251114204610.0140522t2013    my a   f m    000 0 eng d  aTHE0006332(Local)  aUMP0 aWan Ahmad Syafiq Wan Ghafar10aModeling, simulation and experimental verification of variable parameter of suspension spring /cWan Ahmad Syafiq Wan Ghafar  aKuantan, Pahang :bUMP,c2013  axiv, 58 p. :bill. (some col.) ;c30 cm. +e1 CD-ROM  aProject paper (Bachelor of Mechatronics Engineering) -- Universiti Malaysia Pahang -- 2013  aBibilography : p. 52-533 aHelical spring plays an important role in many applications such as machines, and vehicles. When a helical spring is under a static load, it is important to know their static displacement characteristic. The common static model for helical spring is the Wahl’s factor equation, which assumes all design parameters such as spring radius, wire diameter, helix radius and pitch angle are constant. In this research, several mathematical models are used to the static displacement characteristic of automotive suspension helical spring with design parameters. These design parameters include pitch angle, wire diameter and helix radius. Finite element analysis and experimental simulation by Autodesk Simulation Multiphysics (Algor) were performed to verify and support the accuracy of the formulated model with the actual test of the helical spring results. 0aHelical spring