02034nam a2200241 a 4500 vtls000077946 KUKTEM 20251114204613.0 140506t2013 my a f m 001 0 eng d THE0005918(Local) 201905141438 aida 201405061157 Fida 201405061153 Fida UMP TA479.C37 N67 2013 rs Bc. Norfarahanim Muhamad @ Ramli Effects of carburization process on the mechanical properties of carburized mild steel / Norfarahanim Muhamad @ Ramli Kuantan, Pahang : UMP, 2013 xv, 41 p. : ill. ; 30 cm. + 1 CD-ROM Project paper (Bachelor of Mechanical Engineering in Manufacturing) -- Universiti Malaysia Pahang - 2013 Bibliography : p. 38-39 Due to the complexity of parameters in carburizing, there has been relatively little work on process variables during the surface hardening process. This work focuses on the effects of carburization process on the mechanical properties of carburized mild steel, at constant temperature, 850°C with different time, 2 hours, 4 hours and 6 hours and quenched in oil. The objectives of this project are to study the influence of carburization process for mild steel and to study the material performance after carburization process. After carburization process, the test samples were subjected to standard test and form the data obtained, ultimate tensile strength and Young’s modulus were calculated. The case hardness of the carburized samples were measure. It was observed that the mechanical properties of mild steels were found to be strongly influenced by the process of carburization. It was conclude that the sample carburized at 850°C soaked for four hours followed by oil quenching were better because they showed the higher ultimate tensile strength at 541.41096 MPa. Carbon steel Heat treatment 0 0 0 1 20000 20000 2019-09-04 0 TA479.C37 N67 2013 rs Bc. 0000080301 2019-09-04 00:00:00 1 2019-09-04 PSM 0 0 0 1 20000 20000 2019-09-04 0 CD 7755 | TA479.C37 N67 2013 rs Bc. 0000080302 2019-09-04 00:00:00 1 2019-09-04 PSM VIRTUA40 4920 4926 VTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*9992