01958nam a2200229 a 4500 vtls000018740 KUKTEM 20251114204341.0 070315t2006 my f m 000 0 eng d THE0003152(Local) 201905161254 zul 201107131906 VLOAD 200908141307 VLOAD 200908141239 VLOAD 200703151525 kam UMP TD430 .S27 2006 rs Thesis Siti Sarrah Ridzuan Wastewater treatment using combination of stainless steel membrane and adsorption system / Siti Sarrah Binti Ridzuan Kuantan, Pahang : KUKTEM, 2006 46 p. : ill. ; 30 cm. + 1 compter disc Project paper (Bachelor of Chemical Engineering) -- Kolej Universiti Kejuruteraan & Teknologi Malaysia - 2006 A fabricate design of combination membrane filtration and absorption system was used to treat palm oil waste to comply with standard B in regulation of environment act, 1974. This systems as adopted was found to be an efficient method to remove parameters in palm oil waste. The parameters that involves in this study are BOD (Biochemical Oxygen Demand), COD (Chemical Oxygen Demand), pH, TDS (Total Dissolve Solid) and turbidity. From this experiment, the comparison effectiveness between only using membrane filtration and using a combination of stainless steel membrane (membrane filtration) with adsorption columns (adsorption system) can be proven. The adsorbents used in the columns were activated carbon, activated alumina, rice husk and wood waste. The best types of adsorption columns can be determine from this experiment. The columns having a diameter of 6 cm with bed depth 500 cm could treat COD and BOD at average 81.3 % and 79.55%. Effect of flow rate, blank concentration and amount adsorb were studied Water Purification 0 0 0 1 10000 10000 2019-09-04 0 TD430 .S27 2006 rs Thesis 0000021614 2019-09-04 00:00:00 1 2019-09-04 PSM 0 0 0 1 10000 10000 2019-09-04 0 CD 2073 | TD430 .S27 2006 rs Thesis 0000021615 2019-09-04 00:00:00 1 2019-09-04 PSM VIRTUA40 501 507 VTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5200*6500*9992