03045ntm a2200265 a 4500 vtls000084945 KUKTEM 20251117113238.0 150119t2014 my a f m 000 0 eng d THE0002188(Local) 201905131713 yusri 201501191210 fawwaz UMP QD716.P45 A54 2014 r Bc. Ang, Chun How Photocatalysis of glycerol solution / Ang Chun How Kuantan, Pahang : UMP, 2014 xiii, 92 p. : ill. ; 30 cm. + 1 CD-ROM Faculty of Chemical & Natural Resources Engineering Project paper (Bachelor of Chemical Engineering) -- Universiti Malaysia Pahang – 2014 Bibliography : p. 64-68 Several papers have addressed the production of H2 from glycerol solution using catalyst. One of the most innovative ways is via photocatalysis. In this study, titania act as the base catalyst on which copper dopant varies the physicochemical properties. Ultimately, this work was aimed to synthesized and investigated the physicochemical properties of titania supported copper, (Cu/TiO2) photocatalyst for photoreaction of glycerol solution. The photocatalyst, Cu/TiO2 was prepared via wet impregnation method with doped 2, 5, 10, 15, 20 and 25 wt% of Cu. X-ray fluorescence (XRF) showed that the composition of Cu followed the doped weight percentage on TiO2 and liquid-nitrogen physisorption showed that the BET specific surface area decreased with the increment of Cu loading. Thermogravimetric analysis (TGA) showed that Cu decomposed around 450 to 550 K while X-ray diffraction (XRD) proved the Cu/TiO2 was anatase with a new peak 2θ = 13° found as the appearance peak of CuO species. The measured densities were differed from the theoretical calculated densities. The photoreactivity of Cu/TiO2 was tested with methylene blue decomposition and the results have indicated that Cu/TiO2 possessed photoreactivity. The conversions for all the photocatalysts with Cu loading were higher than the pristine TiO2. This has confirmed that Cu loading has effectively increased the photoreaction of glycerol solution. The 2 wt% Cu/TiO2 photocatalyst showed the highest conversion at 97.78%. However, the conversion shows decreasing trend with the increment of Cu loading except for 25 wt% Cu/TiO2. The concentration profiles were fitted to the first order reaction rate law, the rate constant for each Cu/TiO2 was calculated and 2 wt% Cu/TiO2 has the highest rate constant (0.0574 min-1). The photocatalyst loading and concentration loading were conducted. In photocatalyst loading study, 0.83 g/L of 2 wt% Cu/TiO2 can be concluded as the optimum weight loading for 300 mL of glycerol solution. In the glycerol solution study, the amount of photocatalyst (0.25g) considered not optimum to yield the maximum conversion Photocatalysis Glycerols 0 0 0 1 10000 10000 2019-09-04 0 QD716.P45 A54 2014 r Bc. 0000091579 2019-09-04 00:00:00 1 2019-09-04 PSM 0 0 0 1 10000 10000 2019-09-04 0 CD 8557 | QD716.P45 A54 2014 r Bc. 0000091580 2019-09-04 00:00:00 1 2019-09-04 PSM VIRTUA40 5367 5373 VTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5000*5020*5040*5200*6500*6501*9992