01928ntm a2200253 a 4500 vtls000083968 KUKTEM 20251117113239.0 141121t2013 my a f m 000 0 eng d THE0005695(Local) 201905211440 hanafiah 201411211717 fawwaz UMP TA405 .F57 2013 r Bc. Muhammad Firdaus Ab Moin Effect of corrosion on aluminium tailor welded blanks (similar material welding) / Muhammad Firdaus Ab Moin Kuantan, Pahang : UMP, 2013 xvii, 62 p. : ill. ; 30 cm. + 1 CD-ROM Project paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2013 Bibliography : p. 62 In this study, the effect of corrosion on aluminium tailor welded blank with similar metal of aluminium type AA 1100 with different thickness joint by using filler ER 4043 and filler ER 4047 was investigated. Tungsten Inert gas (TIG) was used for butt welding of the process. Corrosion test was tested in 3.5 % Sodium Chloride (NaCl) solution by immersed the specimen for 30 days. Microstructure of base metal (BM), fusion zone (FZ), and heat affected zone (HAZ) was study with image analyzer. Tensile properties of welded joint were investigated by tensile test and hardness of the FZ, HAZ and BM was obtained by Vickers hardness test. From the corrosion test result, it shows that specimen weld by filler ER 4047 has good corrosion resistance than specimen weld by filler ER 4043. The data observed also show that the hardness and tensile properties of welded joint did decrease after the corrosion test. Microstructure at the FZ, HAZ and BM also change with the existence of pitting corrosion Welded joints Strength of materials 0 0 0 1 20000 20000 2019-09-04 0 TA405 .F57 2013 r Bc. 0000086288 2019-09-04 00:00:00 1 2019-09-04 PSM 0 0 0 1 20000 20000 2019-09-04 0 CD 8085 | TA405 .F57 2013 r Bc. 0000086289 2019-09-04 00:00:00 1 2019-09-04 PSM VIRTUA40 5383 5389 VTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992