02907ntm a2200277 a 4500 vtls000088176 KUKTEM 20251117113257.0 150612t2014 my a f m 000 0 eng d THE0005043(Local) 201905140933 SHAHRILJ 201506121555 ariffin 201506121116 ariffin UMP TS1892 .N47 2014 r Bc. Ng, Siew Kim Synthesis of nanocellulose from rubberwood fibers/ Ng Siew Kim Pahang : UMP, 2014 xv, 65 p. : ill. ; 30 cm. + 1 CD-ROM Faculty of Chemical & Natural Resources Engineering Project Paper (Bachelor of Chemical Engineering) -- Universiti Malaysia Pahang - 2014 Includes bibliographical references This research deals with the synthesis of nanocellulose from rubberwood (Hevea brasiliensis) fibers via ultrasonication combined with enzymatic and chemical pretreatments. Cellulose nanofibers were separated from rubberwood fibers in three distinct stages. Initially, rubberwood fibers were subjected to a series of enzymatic and chemical pre-treatments to eliminate lignin and hemicellulose. The obtained cellulose fibers were then mechanically separated into nanofibers using ultrasonication. The diameter distributions of the resulting nanofibers were dependent on the output power of ultrasonic treatment. The extent of dispersion improved significantly with increasing output power of ultrasonic treatment. Microscopy study showed that the diameters of the nanofibers isolated ranged from 8.7 to 20 μm. The effectiveness of laccase and xylanase enzymes was also studied. The results obtained from FTIR and thermogravimetric analyses indicated that there were consistencies between the studied enzymes to the thermal stability or chemical structure. FTIR spectroscopy confirmed that the prominent peaks indicating that most of the lignin and hemicellulose were removed during the step-wise chemical treatment were present in the spectrum. FTIR spectroscopy suggested that the spectrum of cellulose nanofibers obtained under different ultrasonic output powers and cellulose fibers were similar, signifying that the molecular structure of cellulose were unaffected by the ultrasonic treatment. Results from TGA analysis revealed that the thermal properties of cellulose nanofibers were enhanced and the thermal degradation temperature increased to proximately 310 °C as compared to 240 °C of the untreated rubberwood fibers. Results from this work may be potentially applied in various fields such as bio-nanocomposites, filtration media packaging, tissue engineering scaffolds, and so on Rubber Latex Rubber Mechanical properties 0 0 0 1 10000 10000 2019-09-04 0 TS1892 .N47 2014 r Bc. 0000094886 2019-09-04 00:00:00 1 2019-09-04 PSM 0 0 0 1 10000 10000 2019-09-04 0 CD 8734 | TS1892 .N47 2014 r Bc. 0000094887 2019-09-04 00:00:00 1 2019-09-04 PSM VIRTUA40 5954 5960 VTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5000*5020*5040*5200*6500*6501*6502*9992