01895ntm a2200229 a 4500001001400000003000700014005001700021008004100038020002200079040000800101100002600109245013100135260003400266300005700300500004100357502009700398504002700495520103100522610005601553650004501609650001101654vtls000094306KUKTEM20251117113321.0160406t2015    my a   f      000 0 eng d  aTHE0005333(Local)  aUMP0 aMohd Faisal Kamarudin1 aSynthesis and microstructural characterization of aluminium alloy made from recycled automotive scrap /cMohd Faisal Kamarudin  aKuantan, Pahang :bUMP,c2015  axii, 37 p. :bill. (some col.) ;c30 cm. +e1 CD-ROM  aFaculty of Manufacturing Engineering  aProject Paper (Bachelor of Manufacturing Engineering) -- Universiti Malaysia Pahang – 2015  aBibliography: p. 27-283 aIt had been a well know industrial practice of extraction of primary aluminium from its ore (Bauxite). This process involves huge amount of energy consumption. 1.81437kg of bauxite ore is required to produce  0.453592kg of aluminium. Recycling of aluminium requires only 5% of energy for extraction of the primary aluminium from its ore. Owing to the adverse implication of the high Fe-content in the recycled aluminium alloys, it is essential  to  modify  the  brittle  Fe-bearing  phases.  In  this  work,  detailed  investigation was done on the effect of various alloying additions on the morphological changes of the Fe-rich intermetallics in the aluminium alloy made from recycled automotive scrap. The objectives of this study was to conduct melting and casting experiments  by meltinoculation of aluminium automotive scrap, to investigate the morphological changes of Fe-rich  intermetallics  in  the  new  aluminium  alloys  developed  and  to  understand  the effect of melt inoculation on the phase-transformations.2 aFaculty of Manufacturing EngineeringxDissertations 0aUniversities and CollegesxDissertations 0aTheses