Muhammad Aiman Ishak creator software, multimedia my Kuantan, Pahang UMP 2016 monographic eng

electronic

electronic resource

1 computer disc : digital data ; 12 cm. Powder metallurgy (processing) method was used to produce an insert for machining application. An alumina (Al2O3) powder reinforced with Copper power was used as a raw material. A complete die was produced for the insert production. Powder mixing, compaction and sintering using open air furnace were the main processing parameters in the research project. The composite insert was analyzed for density and hardness properties. The result showed that 90% of the theoretical density was achieved and 70% by weight mixed with 30% copper was measured for the higher Vickers hardness value. specialized Muhammad Aiman Ishak Faculty of Manufacturing Engineering Theses Gred B Project Paper (Bachelor of Engineering in Manufacturing Engineering (Hons.)) -- Universiti Malaysia Pahang – 2016 Item in PDF format Faculty of Manufacturing Engineering Dissertations Universities and Colleges Dissertations Theses THE0005113(Local) http://ecollib.ump.edu.my/id/eprint/3971 http://ecollib.ump.edu.my/id/eprint/3971 UMP 161214 20251117113331.0 vtls000098440