01781nam a2200193 a 4500001001400000003000700014005001700021008004100038020002200079040000800101100002300109245005200132260003400184300004000218502010500258520114600363650004301509650003501552vtls000037509KUKTEM20251114204358.0090610t2008    my a   f m    000 0 eng|d  aTHE0006878(Local)  aUMP0 aAshvaany Egambaram10aRFID wireless door system /cAshvaany Egambaram  aKuantan, Pahang :bUMP,c2008  a72 p. :bill. ;c30 cm. +e1 CD-ROM  aProject paper (Bachelor of Electrical Engineering (Electronic)) -- Universiti Malaysia Pahang - 2008  aThe goal of this project is to develop a simple wireless door system using two different technologies.  One of them is the RFID technology and the other one is an XBee Pro wireless device that conform the ZigBee standard.  In most door applications, RFID is utilized as the primary technology for data identification and this data is used as a main source for controlling the operation of a door.  In this project, RFID technology is also used for data identification, but the data obtained will be interfaced with XBee Pro wireless technology.  Then the data will be sent wirelessly to the receiver XBee Pro which in turn controls the opening and closing of a door.  So, the need for wired communication between the RFID system and the door is eliminated.  Furthermore, the door can be controlled from long distance as wireless technology is implemented into the project.  Intermediate between RFID and XBee Pro wireless technology is a microcontroller that works on the instructions build from the C programming language. The same applied between XBee Pro wireless technology and a door which is represented by a LED in the recipient part. 0aRadio frequency identification systems 0aWireless communication systems