000			03135ntm a2200373 i 4500
999			_c100238 _d100244
003			MY-KuUP
005			20251125110824.0
006			t||||fr|||| 000 0
007			ta
008			231128t20232023my a|||gr|||| 000 0 eng d
020			_aTHE0009808 (Local) _qHardback
040			_aUMP _beng _cUMP _erda
090			_aFTKKP .N37 2023 r Thesis
100	1		_aNasreldeen Ishag Obi Kemony, _eauthor.
245	1	0	_aDevelopment of emulsified modified bitumen from industrial waste / _cNasreldeen Ishag Obi Kemony
264		1	_aKuantan, Pahang : _bUMP, _c2023
264		4	_c©2023
300			_axv,100 pages : _billustrations (some color) ; _c30 cm. + _e1 CD-ROM
336			_2rdacontent _atext
336			_2rdacontent _atext
337			_2rdamedia _aunmediated
337			_2rdamedia _acomputer
338			_2rdacarrier _avolume
338			_2rdacarrier _acomputer disc
347			_2rda _atext file _bPDF
500			_aFaculty of Chemical and Process Engineering Technology
502			_aThesis (Master of Science) -- Universiti Malaysia Pahang – 2023
504			_aIncludes bibliographical references
520	3		_aBitumen emulsion is a multi-phase system composed of asphalt, water, and one or more surfactants to stabilise the mixture and it is used for wall coating. Furthermore, the growing volume of global manufacturing waste has resulted in serious environmental issues that necessitate a better waste management strategy. However, the formulation of emulsified modified bitumen from manufacturing waste, such as refined waste oil, could be a viable solution to these issues. The objective of this study is to formulate emulsified modified bitumen (EMB) products, 60/70 grade bitumen were modified with refined waste oil and emulsified with six different emulsifiers (Anionic, Cationic, and Non-Ionic) to be used for surface coating. Samples were formulated by modifying the ratios of bitumen, refined waste oil, and the type of emulsifiers used while keeping other parameters constant. The formulated emulsions were tested and then coated on a drywall substrate, with their performance compared to that of the industrial bitumen emulsion. According to the results, the formulated EMB emulsions had significantly lower emulsion viscosity, good adhesion, and comparable ageing period. More importantly, the heat transfer values (q) in EMB A3 at 60 °C, 45 °C, and 27 °C are 1.80 W, 0.37 W, and 0.41 W respectively. The study also discovered that the higher the bitumen content in cationic EMBs, the greater the ability of the bitumen emulsion for heat insulation. In terms of coating and insulation impact on the substrate, the formulated bitumen emulsion (EMB A3) performs similarly to the industrial bitumen emulsion. More research, however, is required to gain a better understanding of the mechanisms and factors influencing EMB formulation in order to develop an idea for a feasible and environmentally friendly bitumen emulsion.
610	2	0	_aaculty of Chemical and Process Engineering Technology _xDissertations
650		0	_aUniversities and colleges _xDissertations
650		0	_aTheses
942			_2lcc _cTHESIS