000			03048ntm a2200349 i 4500
003			MY-KuUP
005			20260414115106.0
006			t||||fr|||| 000 0
007			ta
008			260414t20252025my a|||fr|||| 000 0 eng d
020			_aTHE0010459 (Local) _qHardback
040			_aUMPSA _beng _cUMPSA _erda
090			_aFIST .A97 2025 r Bc.
100	1		_aAzreen Shafirah Binti Abdullah, _eauthor.
245	1	0	_aSynthesis and characterization of baco2 w-type hexaferrite with addition of carbon black / _cAzreen Shafirah Binti Abdullah
264		1	_aKuantan, Pahang : _bUMPSA, _c2025
264			_c© 2025
300			_axii, 62 pages : _ _billustrations ;
336			_2rdacontent _atext
337			_2rdamedia _aunmediated
338			_2rdacarrier _avolume
347			_2rda _atext file _bPDF
500			_aFaculty of Industrial Sciences and Technology
502			_aFinal Year Report (Bachelor of Applied Science in Material Technology) -- Universiti Malaysia Pahang Al-Sultan Abdullah - 2025
504			_aInclude bibliographical reference
520	3		_aElectronic devices contribute to electromagnetic wave interference causing electromagnetic pollution that affects human health. Electromagnetic pollution was managed by the application of microwave absorber material by controlling reflection loss. The low absorption, narrow bandwidth, and impedance mismatch were related to the reflection loss. BaCo2Fe16O27 was doped with carbon black to increase the absorption, broaden bandwidth, and enhance impedance matching to improve the efficiency of absorption of the material. The BaCo2Fe16O27 was produced by the solid-state method using the ball milling technique at 300 rpm for 12 hours and sintered at 1250 ℃ for 5 hours. Carbon black (10%, 20%, 30%, and 40%) was doped with BaCo2Fe16O27 to fabricate composite material with thicknesses of 1 mm, 2 mm, and 3 mm. The structural, microstructural, and absorption performance was characterized using X-ray Diffraction, Scanning Electron Microscopy, and Vector Network Analyzer. The absorption performance was tested at frequencies ranging from 8 to 18 GHz. The structural analysis confirmed the single-phase formation of BaCo2Fe16O27 with an average crystallite size of 33.19 nm. The microstructural showed spongy and irregularly grain-shaped samples. The reflection loss value increases with the increase of the composition of carbon black improving electromagnetic wave absorption. By varying the thicknesses and composition of carbon black, the microwave absorber material achieved the effective value of reflection loss and frequency. The maximum reflection loss reached about -27.42 dB at a frequency of 9.24 GHz when the thickness was 3 mm on 40% of carbon black and was defined as an excellent absorber material.
610	2	0	_aFaculty of Industrial Sciences and Technology _xDissertations
650		0	_aUniversities and colleges _xDissertations
650		0	_aTheses _xDissertations
856			_uhttps://umpir.ump.edu.my/id/eprint/45995
942			_2lcc _cPSM
999			_c104735 _d104741