| 000 | 02586ntm a2200349 i 4500 | ||
|---|---|---|---|
| 003 | MY-KuUP | ||
| 005 | 20260608105702.0 | ||
| 006 | t||||fr|||| 000 0 | ||
| 007 | ta | ||
| 008 | 260608t20242024my a|||fr|||| 000 0 eng d | ||
| 020 |
_aTHE0010552 (Local) _qHardback |
||
| 040 |
_aUMPSA _beng _cUMPSA _erda |
||
| 090 | _aFTKKP .R56 2024 r Bc. | ||
| 100 | 0 |
_aNurin Qistina Binti Uzir, _eauthor. |
|
| 245 | 1 | 0 |
_aMonitoring real-time parameters in a smart home aquaponic system / _cNurin Qistina Binti Uzir |
| 264 | 1 |
_aKuantan, Pahang : _bUMPSA, _c2024 |
|
| 264 | 4 | _c© 2024 | |
| 300 |
_axii, 48 pages : _billustrations ; |
||
| 336 |
_2rdacontent _atext |
||
| 337 |
_2rdamedia _aunmediated |
||
| 338 |
_2rdacarrier _avolume |
||
| 347 |
_2rda _atext file _bPDF |
||
| 500 | _aFaculty of Chemical and Process Engineering Technology | ||
| 502 | _aFinal Year Report (Bachelor of Chemical Engineering Technology) -- Universiti Malaysia Pahang Al-Sultan Abdullah - 2024 | ||
| 504 | _aInclude bibliographical reference | ||
| 520 | 3 | _aBy combining hydroponics and aquaculture, aquaponics is a method for growing plants using aquaculture wastewater, combining the farming of fish and the soilless cultivation of plants. This method purports to be low in pesticide use, good in water efficiency, and low in fertilizer consumption. If done right, it has the potential to completely replace conventional farming practices. This research proposes an IoT-driven automation control system that uses sensors and Arduino ESP32 microcontroller to monitor and adjust the parameters (pH, turbidity, TDS, temperature, and water level) in aquaponic systems, in contrast to manual procedures. An IoT application transmits real-time data to Google Sheet, where it is shown on an OLED. Turbidity sensor and pH sensor used to make sure turbidity value (<10Ntu) and pH (6.5<pH<9). If out of range, water changes will occur. Using an Arduino ESP32 microcontroller and the Internet of Things, an ultrasonic sensor aids in the monitoring of the water level in the tank to maintain the desired water level which is not less than 10-cm when water pumping out, and not exceed 28-cm when water pumping in the tank. The findings demonstrate that the proposed Smart Automation control and IoT for aquaponic system may be used to monitor and manage the parameters. | |
| 610 | 2 | 0 |
_aFaculty of Chemical and Process Engineering Technology _xDissertations |
| 650 | 0 |
_aUniversities and colleges _xDissertations |
|
| 650 | 0 |
_aTheses _xDissertations |
|
| 856 | _uhttps://umpir.ump.edu.my/id/eprint/47311 | ||
| 942 |
_2lcc _cPSM |
||
| 999 |
_c104939 _d104945 |
||