000			03131ntm a2200349 i 4500
003			MY-KuUP
005			20260622161045.0
006			t|||||r|||| 000 0
007			ta
008			260622t20242024my a|||fr|||| 000 0 eng d
020			_aTHE0010615 (Local) _qHardback
040			_aUMPSA _beng _cUMPSA _erda
090			_aFTKKP .N39 2024 r Bc.
100	0		_aMuhammad Nazri Bin Razali , , , _eauthor.
245	1	0	_aFactorial analysis on production of dielectric composite material from pineapple leaf / _cMuhammad Nazri Bin Razali
264		1	_aKuantan, Pahang : _bUMPSA, _c2024
264		4	_c© 2024
300			_axv, 46 pages : _billustrations ;
336			_2rdacontent _atext
337			_2rdamedia _aunmediated
338			_2rdacarrier _avolume
347			_2rda _atext file _bPDF
500			_aFaculty of Chemical and Process Engineering Technology
502			_aFinal Year Report (Bachelor of Chemical Engineering ) -- Universiti Malaysia Pahang Al-Sultan Abdullah - 2024
504			_aInclude bibliographical reference
520	3		_aLess pollution could enter the environment if pineapple leaf used as the base for production for the dielectric composite material. To determine the most important factors to produce high-performing dielectric materials from pineapple leaves, a few aspects were observed. The purpose of this study is to identify the factors that affect the permittivity and cellulose content of pineapple leaf utilized to make dielectric materials. The tests were designed using a 4-factorial analysis with two responses, boiling time (min), cutting length (cm), weight of pineapple leaf (g), and ratio volume of water (ml) to weight of pineapple leaf (g), to discover the ideal conditions for cellulose content and permittivity. 30 and 50 minutes of boiling time, 600 and 800 mL of water volume, 5 and 10 cm of cutting length, and 0.5 and 2.5 g of weight of pineapple leaf with cellulose content and permittivity as responses were the range values for each factor. The experiment was carried out in 16 runs according to the configuration created by the Design-Expert program. The cellulose content percentage of the sample was determined using Kurschner and Hanack's method, and the permittivity value was determined using Agilent Vector Network (VNA). This result shows an excellent relationship between the measured and expected percentages of cellulose content and permittivity. The pineapple leaf's weight was found to be the most important factor in determining the permittivity value. The study's ideal parameters shown included a 30-minute boiling period, 600 milliliters of water, a 10-cm cutting length, and 2.5 grammes of pineapple leaf weight with percentages of cellulose content and permittivity value of 59.13% and 3.2773, respectively. To conclude, a pineapple leaf could be used as a basis for dielectric composite material.
610	2	0	_aFaculty of Chemical and Process Engineering Technology _xDissertations
650		0	_aUniversities and colleges _xDissertations
650		0	_aTheses _xDissertations
856			_uhttps://umpir.ump.edu.my/id/eprint/47020
942			_2lcc _cPSM
999			_c105013 _d105019