000			02152ntm a2200349 i 4500
003			MY-KuUP
005			20260624103843.0
006			t|||||r|||| 000 0
007			ta
008			260624t20242024my a|||fr|||| 000 0 eng d
020			_aTHE0010627 (Local) _qHardback
040			_aUMPSA _beng _cUMPSA _erda
090			_aFTKKP .F43 2024 r Bc.
100	1		_aNur Fatihah Binti Ismail, _eauthor.
245	1	0	_aTurbidity removal for plasticizer effluent via coagulation and flocculation process / _cNur Fatihah Binti Ismail
264		1	_aKuantan, Pahang : _bUMPSA, _c2024
264		4	_c© 2024
300			_axv, 28 pages : _billustrations ;
336			_2rdacontent _atext
337			_2rdamedia _aunmediated
338			_2rdacarrier _avolume
347			_2rda _atext file _bPDF
500			_aFaculty of Chemical and Process Engineering Technology
502			_aFinal Year Report (Bachelor of Chemical Engineering ) -- Universiti Malaysia Pahang Al-Sultan Abdullah - 2024
504			_aInclude bibliographical reference
520	3		_aThe effluent from plasticizer manufacturing industry contains a high quantity of pollutants that are generated from chemical additives. This effluent has negative effects on human health and the environment. The source of industrial effluents highly influences the properties, composition, and content of pollutants. The objective of this research is to remove the turbidity in the plasticizer wastewater. This research is focused on coagulation and flocculation process. Polyaluminium chloride (PAC) and polyacrylamide (PAM) were used as coagulant and flocculant, respectively. Safely treating this wastewater before being disposed to the natural water sources is essential for attaining the SDGs particularly Goal which is life below water. Via Newton’s optimization method, the optimum condition in removing turbidity was at 1.55 mL of polyarylamide dosage with a percentage removal of 20.69%.
610	2	0	_aFaculty of Chemical and Process Engineering Technology _xDissertations
650		0	_aUniversities and colleges _xDissertations
650		0	_aTheses _xDissertations
856			_u
942			_2lcc _cPSM
999			_c105027 _d105033