000			03193ntm a2200349 i 4500
003			MY-KuUP
005			20260702150117.0
006			t|||||r|||| 000 0
007			ta
008			260702t20242024my a|||fr|||| 000 0 eng d
020			_aTHE0010654 (Local) _qHardback
040			_aUMPSA _beng _cUMPSA _erda
090			_aFTKKP .W44 2024 r Bc.
100	1		_aWun, Wee Long, _eauthor.
245	1	0	_aSimulation of poultry slaughterhouse wastewater treatment process / _b _cWun Wee Long
264		1	_aKuantan, Pahang : _bUMPSA, _c2024
264		4	_c© 2024
300			_axv, 40 pages : _billustrations ;
336			_2rdacontent _atext
337			_2rdamedia _aunmediated
338			_2rdacarrier _avolume
347			_2rda _atext file _bPDF
500			_aFaculty of Chemical and Process Engineering Technology
502			_aFinal Year Report (Bachelor of Chemical Engineering ) -- Universiti Malaysia Pahang Al-Sultan Abdullah - 2024
504			_aInclude bibliographical reference
520	3		_aThis study presents a simulation study of the wastewater treatment process in poultry slaughterhouses using GPS-X simulation software to evaluate the performance of existing Poultry Slaughterhouse Wastewater Treatment Plant (PSWTP) from Integrated Poultry Industries Sdn Bhd (IPI) and optimize the process to minimize environmental impacts as well as comply the environmental regulation stipulated in Industrial Effluent Regulation (IER) 2009. The simulation model incorporates the physical and chemical processes involved in the treatment of poultry slaughterhouse wastewater, including Equation Tank (EQ), chemical treatment, Dissolved Air Flotation (DAF), Sequencing Batch Reactor (SBR), and sludge dewatering system. Then, the calibration and validation of simulation model was carried out by adjusting the model parameters to match the observed performance of the actual treatment system under specific operating conditions to ensure its accuracy and reliability in predicting the behavior of the poultry slaughterhouse wastewater treatment process. Lastly, the optimization of IPI PWS treatment process was conducted with the calibrated simulation model to determine the optimum control condition for the environmental regulation compliance, where the result shown that the existing IPI PSWTP able to treat the poultry wastewater with the influent’s COD concentration of 1,500 mg/L and comply with the DOE discharge standard B consistently for parameters of COD and TSS but the parameter of AN found exceed the DOE discharge standard of 20 mg/L at Day-3, which is not represent the actual measured data due to lacking information of nitrogen compound from the IPI PSWTP for simulation process. Overall, this simulation study provides valuable insights into the design and optimization of poultry slaughterhouse wastewater treatment systems, which can contribute to a more sustainable and environmentally friendly poultry industry.
610	2	0	_aFaculty of Chemical and Process Engineering Technology _xDissertations
650		0	_aUniversities and colleges _xDissertations
650		0	_aTheses _xDissertations
856			_uhttps://umpir.ump.edu.my/id/eprint/47169
942			_2lcc _cPSM
999			_c105109 _d105115