000			03196ntm a2200349 i 4500
003			MY-KuUP
005			20260713104042.0
006			t|||||r|||| 000 0
007			ta
008			260713t20252025my a|||fr|||| 000 0 eng d
020			_aTHE0010713 (Local) _qHardback
040			_aUMPSA _beng _cUMPSA _erda
090			_aFTKKP .S27 2025 r Bc.
100	0		_aSiti Sarah Binti Zulkipli, , , _eauthor.
245	1	0	_aFactorial analysis on alkali treatment for cellulose extraction from sugarcane waste / _cSiti Sarah Binti Zulkipli
264		1	_aKuantan, Pahang : _bUMPSA, _c2025
264		4	_c© 2025
300			_axiv, 39 pages : _billustrations ;
336			_2rdacontent _atext
337			_2rdamedia _aunmediated
338			_2rdacarrier _avolume
347			_2rda _atext file _bPDF
500			_aFaculty of Chemical and Process Engineering Technology
502			_aFinal Year Report (Bachelor of Chemical Engineering ) -- Universiti Malaysia Pahang Al-Sultan Abdullah - 2025
504			_aInclude bibliographical reference
520	3		_aBesides making the main product, companies that process sugarcane also create waste that can harm the environment and need dealing with this waste is a big problem (Kamboj et al., 2024). An alternate technique was created to deal with the increasing quantity of waste generated by the sugarcane farm sector, namely from the production of sugarcane waste (Sugarcane Baggase) is treating fibers with alkali affects their makeup, structure, and properties, fibers taken from sugarcane bagasse were treated with different factors (Bartos et al., 2020). This work's primary objective was to utilize sugarcane waste as a base substances in cellulose extraction and to determine the factorial analysis on alkali treatment cellulose extraction from sugarcane waste. A total of five independent variables were looked at: volume NaOH (300 and 450 ml), soaking time (30 and 120min), cutting length (4 and 8cm) and percentage NaOH (5 and 10%). A Two-Level Factorial Analysis (TLFA) method was used to investigate the components that exert the greatest influence on the cellulose content (%). The experiment was done in 16 runs, following the plan created by the Design-Expert software. The quantities of cellulose content (%) were measured using a method of fiber content analysis (Kurschner-Hanack Method). The findings demonstrated that the amount of sugarcane waste, its size, and the drying temperature were the most crucial factors in influencing the cellulose content (%) percentage. The results show that the volume NaOH, soaking time and cutting length is the most important factor in deciding the cellulose content value. The best conditions found in this study were: 450 ml volume NaOH, 120 min soaking time, 8 cm cutting length and 5 % percentage NaOH. These conditions gave a cellulose content of 80.4 %. In conclusion, sugarcane waste can be a good source for cellulose content value.
610	2	0	_aFaculty of Chemical and Process Engineering Technology _xDissertations
650		0	_aUniversities and colleges _xDissertations
650		0	_aTheses _xDissertations
856			_uhttps://umpir.ump.edu.my/id/eprint/47594
942			_2lcc _cPSM
999			_c105182 _d105188