000			03016ntm a2200349 i 4500
003			MY-KuUP
005			20260806145416.0
006			t|||||r|||| 000 0
007			ta
008			260806t20252025my a|||fr|||| 000 0 eng d
020			_aTHE0010916 (Local) _qHardback
040			_aUMPSA _beng _cUMPSA _erda
090			_aFTKKP .D44 2025 r Bc.
100	0		_aMohamad Deemal Bin Ahmad Kamil, _eauthor.
245	1	0	_aDesulphurization of model oil using ionic liquid / _cMohamad Deemal Bin Ahmad Kamil
264		1	_aKuantan, Pahang : _bUMPSA, _c2025
264		4	_c© 2025
300			_aix, 23 pages : _billustrations ;
336			_2rdacontent _atext
337			_2rdamedia _aunmediated
338			_2rdacarrier _avolume
347			_2rda _atext file _bPDF
500			_aFaculty of Chemical and Process Engineering Technology
502			_aFinal Year Report (Bachelor of Technology Mechanical Engineering (Petroleum) with Hons ) -- Universiti Malaysia Pahang Al-Sultan Abdullah - 2025
504			_aInclude bibliographical reference
520	3		_aFuel containing sulphur (S) compounds emits toxic fumes that threaten the environment. As a result, global research into the process of providing fuel with low S-content has increased. Desulphurization has been conveniently incorporated into fuel processes throughout the year in order to remove the sulphur content in fuel. Hydrodesulfurization (HDS) is the most widely used method for desulphurizing fuel and model oil. However, HDS does not effectively eliminate heterocyclic S-compounds due to sterically hindered adsorption of these compounds on the catalyst surface, specifically dibenzothiophene (DBT). Because of its mild operating conditions, the extractive desulfurization (EDS) process is introduced as an alternative. EDS enables the selective extraction of S-components from fuel oils while preserving the chemical and physical properties of the other compounds. Ionic liquids (ILs) is an appealing method to the solvent used in EDS.In this research,the type of ILs used are Tetrabutylammonium Chloride:Polyethylene Glycol (TBAC:PEG).The objective of this research is to evaluate extractability of TBAC:PEG in removing sulphur compound (dibenzothiophene, DBT) in model oil with dodecane. For the standard sample, the model oil dodecane is mixed with dibenzothiophene (DBT) is analyze and a calibration curve is plotted.Then,a series of model oil with concentration 400,550 and 700 ppm were prepared.The research conducted under three parameters;volume ratio of ILs to model oil,compound concentration and the extraction time of sulphur.GC-FID were used to analyze the sulphur content in model oil.The data obtained is compared to calibration curve and the sulphur removal efficiency is calculated.
610	2	0	_aFaculty of Chemical and Process Engineering Technology _xDissertations
650		0	_aUniversities and colleges _xDissertations
650		0	_aTheses _xDissertations
856			_uhttps://umpir.ump.edu.my/id/eprint/48084
942			_2lcc _cPSM
999			_c105412 _d105418