| 000 | 03432ntm a2200349 i 4500 | ||
|---|---|---|---|
| 003 | MY-KuUP | ||
| 005 | 20260810100421.0 | ||
| 006 | t|||||r|||| 000 0 | ||
| 007 | ta | ||
| 008 | 260810t20252025my a|||fr|||| 000 0 eng d | ||
| 020 |
_aTHE0010928 (Local) _qHardback |
||
| 040 |
_aUMPSA _beng _cUMPSA _erda |
||
| 090 | _aFTKKP .A53 2025 r Bc. | ||
| 100 | 0 |
_aMuhammad Aiman Afiq Bin Mohd Azmi, _eauthor. |
|
| 245 | 1 | 0 |
_aDevelopment of cu/fns derived from palm oil fuel ash (pofa) for photocatalytic degradation of methylene blue / _cMuhammad Aiman Afiq Bin Mohd Azmi |
| 264 | 1 |
_aKuantan, Pahang : _bUMPSA, _c2025 |
|
| 264 | 4 | _c© 2025 | |
| 300 |
_aix, 45 pages : _billustrations ; |
||
| 336 |
_2rdacontent _atext |
||
| 337 |
_2rdamedia _aunmediated |
||
| 338 |
_2rdacarrier _avolume |
||
| 347 |
_2rda _atext file _bPDF |
||
| 500 | _aFaculty of Chemical and Process Engineering Technology | ||
| 502 | _aFinal Year Report (Bachelor of Chemical Engineering Technology (Hons) ) -- Universiti Malaysia Pahang Al-Sultan Abdullah - 2025 | ||
| 504 | _aInclude bibliographical reference | ||
| 520 | 3 | _aMethylene Blue (MB) usage in industries leads to the production of wastewater with leftover dye significantly contributes to water pollution and harms the environment. This study explores the solutions of MB with the application of fibrous nano-silica (KCC-1) sourced from environmentally friendly and reusable palm oil fuel ash (POFA). Copper (Cu) doped with the synthesised KCC-1, resulting in the Cu/KCC-1 photocatalyst. Nearly 10,000 types of synthetic dyes with a worldwide production of 7 × 105 tons per year. Methylene blue (MB) is a common dye found in wastewater from textile industries. This dye poses a problem because it's toxic and persistent in the environment. In Malaysia, over 1,000 tons of POFA are disposed of in lagoons and landfills without utilization. Utilize POFA, a solid waste as a silica source is essential for catalyst development. The preparation of Cu/FNS derived from palm oil fuel ash (POFA) was done through microemulsion technique and wet impregnation method. Comprehensive characterization techniques validated the catalyst's characteristic, including SEM-EDX, XRD, FTIR, and UV–Vis DRS. The photocatalytic degradation of MB via One-factor-at-time (OFAT) has been conducted to identify the independent variables and range. The OFAT approach examines how model outputs change in response to variations in model input. The study focused on the photocatalytic degradation of MB, resulting in an 85.71% degradation rate under optimal conditions: a catalyst dosage of 5 g/L, a pH of 8, and an initial MB concentration of 10 mg/L. This study successfully synthesizes and characterizes both KCC-1 and Cu/KCC-1. The characteristics identified, including a strong Si-O-Si interaction, a lowered band gap energy, and distribution of Cu, emphasize the distinctive features of dendritic fibrous structures and the improved attributes brought about by the Cu content. The distinctive dendritic fibrous structure and the successful incorporation of Cu, rendering it a promising candidate for diverse catalytic application for photocatalytic degradation. | |
| 610 | 2 | 0 |
_aFaculty of Chemical and Process Engineering Technology _xDissertations |
| 650 | 0 |
_aUniversities and colleges _xDissertations |
|
| 650 | 0 |
_aTheses _xDissertations |
|
| 856 | _uhttps://umpir.ump.edu.my/id/eprint/47747 | ||
| 942 |
_2lcc _cPSM |
||
| 999 |
_c105424 _d105430 |
||