000			02011nam a2200241 a 4500
001			vtls000041375
003			KUKTEM
005			20251114204408.0
020			_aTHE0006638(Local)
039		9	_a201905161453 _bamirul _c201107132205 _dVLOAD _c200908141655 _dVLOAD _c200908141639 _dVLOAD _y200908131031 _zida84
040			_aUMP
090			_aTJ1280 .A44 2008 rs Bc.
100	0		_aAlexius An'yan
245	1	0	_aEffect of grinding process parameters on grinding force of aluminium alloys / _cAlexius An'yan
246	3		_aEffect of grinding process parameters on grinding force of aluminium alloys _h[electronic resource]
260			_aKuantan, Pahang : _bUMP, _c2008
300			_a53 p. : _bill. (some col.) ; _c30 cm. + _e1 computer disc
502			_aProject paper (Bachelor of Mechanical Engineering with Manufacturing) -- Universiti Malaysia Pahang - 2008
520	3		_aSignificant developments have recently been made in the grinding of metals. Many researches have been devoted to determining the effect of these grinding parameters towards grinding force. The aim of this project is to study the effect of grinding process parameters namely depth of cut, number of passes, and use of coolant on grinding force of aluminium alloy (AA6061-T6). A three component force transducer dynamometer (Kistler Model Type 5070) was used to measure grinding forces in this experiment. A full factorial experimental design was used as the approach for the design of experiment. Through the analysis of variance (ANOVA) conducted, it was found that the most significant parameter is the usage of coolant followed by depth of cut. Meanwhile, number of passes was found to be not significant. In conclusion, the grinding force values increased as the number of passes became higher in proportional to depth of cut. The grinding force also increased if running in dry condition.
650		0	_aGrinding and polishing
650		0	_aMachining
999			_aVIRTUA40 _c1302 _d1308
999			_aVTLSSORT0200*0400*0900*1000*2450*2460*2600*3000*5020*5200*6500*6501*9992