MARC View

000			02045nam a2200241 a 4500
001			vtls000045991
003			KUKTEM
005			20251114204411.0
008			100604t2009 my dao f m 000 0 eng d
020			_aTHE0005812(Local)
039		9	_a201905131507 _baida _c201204091046 _dFida _c201107132215 _dVLOAD _y201006041554 _zFida
040			_aUMP
090			_aTA418.84 .A44 2009 rs Bc.
100	0		_aMohd Alhafiz Maznan
245	1	0	_aDesign and fabricate an acoustic emission sensor adapter for engine performance monitoring / _cMohd Alhafiz Bin Maznan
260			_aKuantan, Pahang : _bUMP , _c2009
300			_axiii, 67 p. : _bill. (some col.) ; _c30 cm. + _e1 CD-ROM
502			_aProject paper (Bachelor of Mechanical Engineering with Automotive) -- Universiti Malaysia Pahang - 2009
504			_aBibliography : p. 49-52
520	3		_aThis project was carried out to design and fabricate an Acoustic Emission (AE) sensor adapter for engine performance monitoring. Before fabrication process, a standard test that called Pencil Break Test must be conducted to check the suitability of the materials. Aluminium and Mild Steel were used as the material of the adapter. The source of the AE signals came from the breaking of the pencil leads (2H). The selection of the type of the pencil lead is based on the ASTM D-3363 hardness rating. The source of the AE signal was recorded by AE sensor with the help of the AED ver2.13 software. RMS amplitude was chose as the parameter for experiment. The three experiments were conducted which is without using adapter, using aluminium adapter and using mild steel adapter. The data from each experiment were analyzed statistically by Microsoft Excel and normal distribution graph was plotted. The graphs were compared and shows that the different between the three experiments. Based on the result, Mild Steel adapter give best result compare to Aliminium adapter.
650		0	_aAcoustic emission testing
999			_aVIRTUA40 _c1378 _d1384
999			_aVTLSSORT0080020004000900100024502600300050205040520065009992