000 02984nam a2200253 a 4500
001 vtls000038508
003 KUKTEM
005 20251114204413.0
008 090623t2008 my a f m 000 0 eng d
020 _aTHE0007040(Local)
039 9 _a201906130954
_bhanafiah
_c201107132230
_dVLOAD
_c200908141636
_dVLOAD
_c200908141610
_dVLOAD
_y200906231620
_zkam
040 _aUMP
090 _aTK7881.25 .D37 2008 rs Bc.
100 0 _aDarlene Mohamad Douglas
245 1 0 _aHome automation system using power line communication /
_cDarlene Binti Mohamad Douglas
246 3 _aHome automation system using power line communication
_h[electronic resource]
260 _aKuantan, Pahang :
_bUMP,
_c2008
300 _a93 p. :
_bill. ;
_c30 cm. +
_e1 computer disc
502 _aProject paper (Bachelor of Electrical Engineering (Electronics)) -- Universiti Malaysia Pahang - 2008
520 3 _aIn recent years, for its convenient installation and low cost, the power line increasingly become a popular transmission medium in creating residential network. In houses, lamp switches normally located at a high location and it is hard to reach for the switches without help for kids and disable person including people who unable to move a lot due to accident cases. These problems can be overcome by using the Home Automation System Using Power Line Communication (PLC) at home which is user friendly and cost efficient. It requires only electricity to run the system. Hence this system is very simple and cheap. The objective of this project is to build a home automation system using a PLC modem and applying PIC microcontroller to control and automate lamps and gates. A simple home automation system using power line communication (PLC) which is convenient for people with disabilities and elderly to control lamps and gates using a computer at home is showed in this paper. The computer operates as a host station, connecting to the PLC modem serially using Recommended Standard 232 (RS232) and a transceiver MAX232. User will automate the home appliance based on the Graphical User Interface (GUI) by selecting the button appeared on their computer screen. The buttons are designed using the Visual Basic 6.0. The PLC modem (TDA5051A) operates by modulating in a carrier wave of between 20-200 kHz into the household wiring at the transmitter. This modem is plugged into regular power outlet. The carrier is modulated by digital signals (Amplitude Shift Keying). The receiver demodulates the carrier wave and sends the signal to the micro controller which is the PIC16F877. The receiver has an address and can be commanded by the signals transmitted over the household wiring and decoded at the receiver. The PIC controls the home appliances to function. In this project, the home appliance specified is the gate and the lamp.
650 0 _aHome automation
650 0 _aElectric power systems
999 _aVIRTUA40
_c1449
_d1455
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5200*6500*6501*9992