000 02553nam a2200241 a 4500
001 vtls000018786
003 KUKTEM
005 20251114204416.0
008 070316t2006 my f 000 0 eng d
020 _aTHE0005035(Local)
039 9 _a201905140925
_bSHAHRILJ
_c201107132236
_dVLOAD
_c200908141308
_dVLOAD
_c200908141240
_dVLOAD
_y200703161611
_zfarina
040 _aUMP
090 _aTS1175 .K86 2006 rs Thesis
100 0 _aKu Marsilla Ku Ishak
245 1 0 _aEffect of different organic loading rate on biological pretreatment to chemical pulping process /
_cKu Marsilla Binti Ku Ishak
260 _aKuantan, Pahang :
_bKUKTEM ,
_c2006
300 _axiv, 57 p. :
_bill ;
_c30 cm. +
_e1 computer disc
502 _aProject paper (Bachelor of Chemical Engineering) -- Kolej Universiti Kejuruteraan dan Teknologi Malaysia - 2006
504 _aBibliography: p. 49-52
520 _aPulping is the process by which the fibres in the wood or non wood are separated and treated to produce pulp. Commercial non wood pulp production has been estimated to be 6.5% of the global pulp production and is expected to increase. One of the materials found to be promising was banana stem waste, which is very good source of cellulose. These approaches offer several advantages, since these raw materials can be produced annually and have generally lower lignin contents and lower than wood-based materials. A lignin content in banana stem waste is about 12.25%. The effect of different organic loading rate on biological pretreatment to chemical pulping process was initiated in this studies using mix culture that was obtained in banana plantation. The samples that have been treated appeared to give lower lignin contents than untreated. The cellulose composition for treated samples could be say as maintained although there are a very slight depreciation because of the degradation of cellulose give higher content of glucose. The organic loading rate used in this study are 2,5 and 8g/liter day.Organic loading rate of 5g/liter day are the most efficient and have the maximum production rate by the mix culture while the others are not so encouraging. This may have been caused by the limitation of one of the parameter that is the substrate. Theoretically, biological pretreatment is effective, more beneficial and have high interest in the industry due its potential to save energy, reduce chemical needs and have less impact on environment
650 0 _aPulping
999 _aVIRTUA40
_c1546
_d1552
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*9992