MARC View

000			02151nam a2200241 a 4500
001			vtls000025496
003			KUKTEM
005			20251114204416.0
008			080312t2007 my f m 000 0 eng\|d
020			_aTHE0006995(Local)
039		9	_a201906131413 _baida _c201107132238 _dVLOAD _c200908141418 _dVLOAD _c200908141350 _dVLOAD _y200803121529 _zkam
040			_aUMP
090			_aTK7872.P76 W58 2007 rs Thesis
100	0		_aWan Nur Azhani W. Samsudin
245	1	0	_aAC motor position control using fuzzy logic controller / _cWan Nur Azhani Bt. W. Samsudin
260			_aKuantan, Pahang : _bUMP, _c2007
300			_a213 p. : _bill. (some col.) ; _c30 cm.
502			_aProject paper (Bachelor of Electrical Engineering (Electronics)) -- Universiti Malaysia Pahang - 2007
520	3		_aMotor position control is very important in rotating machinery applications. There are many applications that have been developed based on motor position control theory, such as crane controller, lift and conveyor. The position control of an ac motor is very difficult to be implemented by using traditional control techniques, as it requires a very complex mathematical model. The purpose for this project is to describe the research on fuzzy logic controller (FLC) design based on programmable logic controller (PLC) in order to control the position of an ac motor of University Malaysia Pahang (UMP) mini conveyor. By using FLC, the conveyor will stop at the desired point set by the user with minimum error. The model of the PLC that has been used in this project is OMRON CQM1H-CPU51. Before the controller was developed, numbers of simulations were done using MATLAB Fuzzy Logic Toolbox and SIMULINK. There are three rules that have been implemented in this project, which used three membership functions. Based on the simulation, it can be concluded that the system which has many rules in the fuzzy logic controller produced better response compared to the system using a few rules. -Author
650		0	_aFuzzy logic
650		0	_aProgrammable logic controllers
999			_aVIRTUA40 _c1547 _d1553
999			_aVTLSSORT0080020004000900100024502600300050205200650065019992