| 000 | 02364nam a2200277 a 4500 | ||
|---|---|---|---|
| 001 | vtls000045052 | ||
| 003 | KUKTEM | ||
| 005 | 20251114204421.0 | ||
| 008 | 100128t2009 my a f m 000 0 eng|d | ||
| 020 | _aTHE0004303(Local) | ||
| 039 | 9 |
_a201905161407 _bfarhana _c201108030948 _dFida _c201107132306 _dVLOAD _c201002181456 _dida _y201001281200 _zida |
|
| 040 | _aUMP | ||
| 090 | _aTP242. Z87 2009 rs Bc. | ||
| 100 | 0 | _aZuriah Ismail | |
| 245 | 1 | 0 |
_aPermeability and selectivity study for polyethersulfone membrane for gas separation/ _cZuriah Ismail |
| 246 | 3 |
_aPermeability and selectivity study for polyethersulfone membrane for gas separation _h[computer file] |
|
| 260 |
_aKuantan, Pahang : _bUMP, _c2009 |
||
| 300 |
_a49 p. : _bill. (some col.) ; _c30 cm. + _e1 computer disc |
||
| 502 | _aProject paper (Bachelor of of Chemical engineering (Gas Technology)) -- Universiti Malaysia Pahang - 2009 | ||
| 504 | _aBibliography : p. 54 - 59 | ||
| 520 | 3 | _aAn symmetric polyethersulfone (PES) membrane were prepared through a dry/wet phase inversion process. The casting solution developed in this research consisted of PES, 1-methyl-2-pyrolidone (NMP) and methanol. The turbidity test was carried out to find an ideal weight percentage of casting solution. Membrane composition of 22.28 wt% and 26.58 wt% of PES was used for permeability test. PES membrane was divided into three categories; uncoated, coated with polydimethylsiloxane (PDMS) and coated with bromine solution. Permeation test was carried out by testing CO2, CH4, N2 and O2 permeating through the membrane to check the permeability and selectivity of the respective gas to CH4. Different coating agent gave different rate of permeate while higher polymer concentration increased the permeation rate. The PES membrane coated with PDMS showed higher selectivity compared to uncoated membrane and membrane coated with bromine solution. The selectivity of CO2/CH4 was approximately 2.77, at 26.58wt% of PES concentration coated with 3wt% of PDMS. It was believed that different coating agent strongly affects the membrane performance as well as the polymer concentration.-Author- | |
| 650 | 0 | _aSeparation (Technology) | |
| 650 | 0 |
_aGases _xSeparation |
|
| 650 | 0 | _aGas separation membranes | |
| 999 |
_aVIRTUA40 _c1673 _d1679 |
||
| 999 | _aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5040*5200*6500*6501*6502*9992 | ||