000 02184nam a2200253 a 4500
001 vtls000045460
003 KUKTEM
005 20251114204425.0
008 100429t2009 my a f m 000 0 eng|d
020 _aTHE0004848(Local)
039 9 _a201905161130
_bsmfh
_c201112051404
_dFida
_c201107132316
_dVLOAD
_y201004291424
_zida
040 _aUMP
090 _aTP754 .H37 2009 rs Bc.
100 0 _aNorhassimah Hassim
245 1 0 _aInfluence of polyaniline deposited on Mg towards sensitivity to LPG and CO2 /
_cNorhassimah Binti Hassim
260 _aKuantan, Pahang :
_bUMP,
_c2009
300 _axvii, 73 p. :
_bill. (some col.) ;
_c30 cm. +
_e1 computer file
502 _aProject paper (Bachelor of Chemical Engineering (Gas Technology)) -- Universiti Malaysia Pahang - 2009
504 _aBibliography : p. [63]-66
520 3 _aGas sensors are primarily used in the gas and oil industry and have a very commercial value due to its higher sensitivity properties in detecting minor leakage. As the sensors heterojunction are composed of combination metal oxide and organic polymer, the use of sensor would expect upgrade in term of their sensitivity, selectivity and stability. Two methods used for heterojunction fabrication are chemical bath deposition and electrodeposition. The sensors sample are tested based on I-V characteristic would inevitably inflict low current values. In this experimental work, MgO was employed due to its high conductivity and lower operating cost while polyaniline was used due to its high mechanical strength. Two different gases were used, which are LPG and CO2 respectively. Preliminary results showed that the sensor sample was successfully giving the conductivity effect. Further studies also revealed that the response time of sensor was mainly influenced by the different concentration of gases used. The higher gas response for LPG is 45% while for CO2 is 55%. Low concentration of the gases can be improved in future study by carrying out the larger scale of sensing chamber.
650 0 _aGas detectors
650 0 _aLiquefied petroleum gas
999 _aVIRTUA40
_c1777
_d1783
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992