| 000 | 02222nam a2200265 a 4500 | ||
|---|---|---|---|
| 001 | vtls000045512 | ||
| 003 | KUKTEM | ||
| 005 | 20251114204425.0 | ||
| 008 | 100504t2009 my a f m 000 0 eng d | ||
| 020 | _aTHE0005732(Local) | ||
| 039 | 9 |
_a201905221013 _bhanafiah _c201108031319 _dFida _c201107132316 _dVLOAD _c201005041027 _dida _y201005041022 _zida |
|
| 040 | _aUMP | ||
| 090 | _aTA418.17 .H57 2009 rs Bc. | ||
| 100 | 0 | _aNorul Hisyam Md Sabri | |
| 245 | 1 | 0 |
_aInvestigate the influence of nothes on stresses for mild steel and aluminum/ _cNorul Hisyam Bin Md Sabri |
| 246 | 3 |
_aInvestigate the influence of nothes on stresses for mild steel and aluminum _h[computer file] |
|
| 260 |
_aKuantan, Pahang : _bUMP, _c2009 |
||
| 300 |
_axv, 42 p. : _bill. (some col.) ; _c30 cm. + _e1 computer disc |
||
| 502 | _aProject paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2009 | ||
| 504 | _aBibliography : p. 38 | ||
| 520 | 3 | _aThe diameter and type of notches has the influence to stresses any of design that has the notches. So, there is lot of research been done about the relationship of notches and stress. Many failures in engineering applications or machine components have been caused by notches at which stress was concentrated. Hence, the main objective of this study is to investigate the influence of notches on stresses for mild steel and aluminum. The investigation was based on the types and radius of notches. Both experiment and simulation were done in order to validate the result. The experiment was carried out by using tensile test to obtain maximum stress to the specimen while the simulation was analyzed by using ALGOR V22 software to obtain the stress of the specimen. The material that used in the experiment is mild steel and aluminum and for ALGOR V22 is steel ASTM-A36 and aluminum alloy 1100-H14. The experimental results and the finite element analysis results show that the maximum stress will decrease when the ratio r/d is increase. Thus, the influence of notches on the stresses has been evaluated. | |
| 650 | 0 | _aNotch effect | |
| 650 | 0 | _aStrength of materials | |
| 999 |
_aVIRTUA40 _c1788 _d1794 |
||
| 999 | _aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5040*5200*6500*6501*9992 | ||