| 000 | 02337nam a2200289 a 4500 | ||
|---|---|---|---|
| 001 | vtls000045664 | ||
| 003 | KUKTEM | ||
| 005 | 20251114204426.0 | ||
| 008 | 100511t2009 my ao f m 000 0 eng d | ||
| 020 | _aTHE0005853(Local) | ||
| 039 | 9 |
_a201905131640 _baida _c201107132318 _dVLOAD _y201005111113 _zida |
|
| 040 | _aUMP | ||
| 090 | _aTA418.9.F5 R33 2009 rs Bc. | ||
| 100 | 0 | _aRadin Mohd Ali Radin Bahrom | |
| 245 | 1 | 0 |
_aMechanical property evaluation of bamboo fiber reinforced epoxy composite / _cRadin Mohd Ali Radin Bahrom |
| 246 | 3 |
_aMechanical property evaluation of bamboo fiber reinforced epoxy composite _h[electronic resource] |
|
| 260 |
_aKuantan, Pahang : _bUMP, _c2009 |
||
| 300 |
_axv, 46 p. : _bill. (some col.) ; _c30 cm. + _e1 computer disc |
||
| 502 | _aProject paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2009 | ||
| 504 | _aBibliography : p. 39-40 | ||
| 520 | 3 | _aNatural fiber has emerged as a renewable and cheaper substitute to synthetic fiber which is use as reinforcement material. The main objective of this study is to investigate the performance of bamboo fiber reinforced epoxy composite and to investigate the mechanical property of bamboo fiber reinforced composite with different fiber orientation. This analysis was carried out by using commercial Finite Elements software (ALGOR) to evaluate the behavior of the composite. Tensile and flexural test was carried out to obtain tensile and flexural strength of the composite. Three type of composite with different fiber orientation were tested in this project. Unidirectional composite was found had a higher tensile strength and multidirectional composite had higher flexural strength. From the observation, increasing the number of layer in the composite, the value of tensile strength will decrease but the value o flexural strength will increase. Thus, the tensile strength of bamboo fiber composite is depends on the degree of the orientation of the fiber. For the flexural strength of bamboo fiber composite, it depends on the number of layer or thickness of the composite. | |
| 650 | 0 | _aComposite materials | |
| 650 | 0 | _aFibers | |
| 650 | 0 | _aStrength of materials | |
| 650 | 0 | _aEpoxy compounds | |
| 999 |
_aVIRTUA40 _c1804 _d1810 |
||
| 999 | _aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5040*5200*6500*6501*6502*6503*9992 | ||