| 000 | 02288nam a2200265 a 4500 | ||
|---|---|---|---|
| 001 | vtls000045680 | ||
| 003 | KUKTEM | ||
| 005 | 20251114204427.0 | ||
| 008 | 100511t2009 my ao f m 000 0 eng d | ||
| 020 | _aTHE0006519(Local) | ||
| 039 | 9 |
_a201905141450 _bamirul _c201107132318 _dVLOAD _y201005111618 _zida |
|
| 040 | _aUMP | ||
| 090 | _aTJ1185 .R35 2009 rs Bc. | ||
| 100 | 0 | _aMohamad Rais Ramli | |
| 245 | 1 | 0 |
_aInvestigation on surface roughness of mild steel using coated carbide cutting tools / _cMohamad Rais Bin Ramli |
| 246 | 3 |
_aInvestigation on surface roughness of mild steel using coated carbide cutting tools _h[electronic resource] |
|
| 260 |
_aKuantan, Pahang : _bUMP, _c2009 |
||
| 300 |
_axii, 40 p. : _bill. (some col.) ; _c30 cm. + _e1 computer disc |
||
| 502 | _aProject paper (Bachelor of Mechanical Engineering with Manufacturing Engineering) -- Universiti Malaysia Pahang - 2009 | ||
| 504 | _aBibliography : p. 34-35 | ||
| 520 | 3 | _aThis paper presents an investigation on surface roughness of mild steel operation using coated carbide cutting tools. There are three objective of this project that needs to be accomplished. First is to investigate the effect of various cutting condition for surface roughness and second is to find the factors or variable that mostly affects the surface roughness of mild steel. Comparing the surface roughness value between exact experiment and prediction is the last objective that must been done. The work piece is been turning for 9 parts due to 9 experiment for each cutting parameters that had been set before. After gathered all data or value that needed, two analysis are been performed. From the ANOVA analysis, the cutting speed is proving to be the most affect variable than depth of cut. The P-value indicated that cutting speed is significant than depth of cut with using 95% confident intervals. The analysis from ANOVA also indicated the best parameter use for turning at 50mm diameter mild steel. The results from multiple regression analysis shows that the predicted value almost same with experimental value, means the equation generated is 95 % accuracy. | |
| 650 | 0 | _aMachining | |
| 650 | 0 | _aMetal-cutting | |
| 999 |
_aVIRTUA40 _c1833 _d1839 |
||
| 999 | _aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5040*5200*6500*6501*9992 | ||