000			02007nam a2200253 a 4500
001			vtls000046004
003			KUKTEM
005			20251114204429.0
008			100607t2009 my da f m 000 0 eng d
020			_aTHE0002746(Local)
039		9	_a201905280921 _bnazirah _c201107132323 _dVLOAD _y201006071103 _zida
040			_aUMP
090			_aTA455.C43 R69 2009 rs Bc.
100	0		_aRozainah Ibrahim
245	1	0	_aStudy on physical properties of ceramic filled as a roof coating / _cRozainah Binti Ibrahim
246	3		_aStudy on physical properties of ceramic filled as a roof coating _h[electronic resource]
260			_aKuantan, Pahang : _bUMP, _c2009
300			_axii, 41 p. : _bill. (some col.) ; _c30 cm. + _e1 computer disc
502			_aProject paper (Bachelor of Civil Engineering) -- Universiti Malaysia Pahang - 2009
504			_aBibliography : p. 39-41
520	3		_aCeramic filled coating is a roof coating material that consist of ceramic and polymer. The function of this coating is not only as a heat-resistant but it also can deflect the sun’s rays thus lowering inside temperature dramatically. It’s also act like a sound resistance which lower sound levels in the building by filling cracks at the roof. In this study, it focused on choosing the optimum condition of the ceramic and polymer to be as a roof coating. This optimum condition can be determined by doing the tensile test. The maximum tensile stress was obtained using the sample with the 2.0% of ceramic added with 1kg of acrylic polymer. This proportion is best among the other samples because it gain maximum tensile stress (574.67 kN/m2) and maximum load (17.24 kN). Viscosity test being carried out in relationship with the curing time of the coating after being applied to the roof. The result of the viscosity is increasing with the value of the percentage of ceramic added.
650		0	_aCeramic coating _xTesting
999			_aVIRTUA40 _c1899 _d1905
999			_aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5040*5200*6500*9992