000 02880nam a2200253 a 4500
001 vtls000045886
003 KUKTEM
005 20251114204430.0
008 100524t2009 my dao f m 000 0 eng d
020 _aTHE0007339(Local)
039 9 _a201905141505
_bfawwaz
_c201107132321
_dVLOAD
_c201103301002
_dida
_y201005241158
_zida
040 _aUMP
090 _aTL275 .F37 2009 rs Bc.
100 0 _aMohd Farhan Mohd Pilus
245 1 0 _aImprovement design for power window mechanism of cable type /
_cMohd Farhan Bin Mohd Pilus
246 3 _aImprovement design for power window mechanism of cable type
_h[electronic resource]
260 _aKuantan, Pahang :
_bUMP,
_c2009
300 _axv, 59 p. :
_bill. (some col.) ;
_c30 cm. +
_e1 computer disc
502 _aProject paper (Bachelor of Mechanical Engineering with Automotive Engineering) -- Universiti Malaysia Pahang - 2009
504 _aBibliography : p. 56
520 3 _aPower windows system or electric windows is divided in two types. They are cable type power window system and scissor type power window system. The main function of the power windows is to raise and lower automobile windows by depressing a button or switch, as opposed to using a hand-turned crank handle. The system have five components which are the window, the frame and guide rails, the electric motors and the door frame. In the cable type, the electric motors that are provided consist of the motor and a cable driven track that raises and lowers the window. The motor assembly will need to be fastened to the door frame. These components were reviewed for differences in shape and construction prior to being assembled to the vehicles. There are difference specifications for different manufacturers. For this project, power window system of Proton Gen-2 car was chosen to be benchmarking. Then the parts that always failed will be defined. The parts will be redesign and the material will be changed. The current and new parts were design by using SOLIDWORK software in dimensional of Proton Gen-2 car power window system. By using FEA tools that is ALGOR software, the design was analyzed using constant force. Improvement of power window parts design was compared based on material used, analysis on Stress Von Mises and displacement, buying and repairing cost, and others. The new design that will give the lowest value of Stress Von Mises and displacement will be selected as the improvement part. The material that will be selected also deal with the value of stress and displacement. The important result is to improve power window parts in order to enhance the life time of the system and to give advantages to the car users such as reducing the maintenance cost.
650 0 _aAutomobiles
_xWindows and windshields
_xDesign and construction
999 _aVIRTUA40
_c1927
_d1933
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5040*5200*6500*9992