| 000 | 02338ntm a2200253 a 4500 | ||
|---|---|---|---|
| 001 | vtls000083713 | ||
| 003 | KUKTEM | ||
| 005 | 20251114204431.0 | ||
| 008 | 141119t2013 my a f m 000 0 eng d | ||
| 020 | _aTHE0006370(Local) | ||
| 039 | 9 |
_a201905131258 _bamirul _c201905131134 _damirul _c201905131117 _damirul _c201411210931 _dariffin _y201411191649 _zariffin |
|
| 040 | _aUMP | ||
| 090 | _aTJ797 .K43 2013 r Bc. | ||
| 100 | 0 | _aKhalifaturrahim Bin Ab Rahman | |
| 245 | 1 | 0 |
_aExperimental study of alternative fuel performance operating in single cylinder diesel engine / _cKhalifaturrahim Bin Ab Rahman |
| 260 |
_aKuantan, Pahang : _bUMP, _c2013 |
||
| 300 |
_axiv, 43 p. : _bill. (some col.) ; _c30 cm. |
||
| 502 | _aProject paper (Bachelor of Mechanical Engineering (Automative Engineering)) -- Universiti Malaysia Pahang – 2013 | ||
| 504 | _aBibliography : p. 39-40 | ||
| 520 | 3 | _aThis thesis deals with the design and fabrication of leak test rig. This thesis will discuss about leakage problems in industrial pipelines. The objective of this thesis is to design and fabricate a leak test rig. The thesis describes the approaches of designing and fabricating a leak test rig. There are numerous steps taken to design and fabricate the test rig. The structural three-dimensional solid modelling design of test rig was developed by using the Solidwork engineering drawing software. The fabrication process also undergoes many steps such as material marking, cutting, drilling, welding and grinding. In addition, it also explains the procedure of testing by the simulation of three types of common leakages which includes pinhole, pipe crack/dent and gasket leak. The testing the rig is also explained in this thesis by maintaining a pressure of 4 bars in the test rig to prove whether the test rig is functioning efficiently. Finally, the conclusion about this project is that the project objectives were achieved which was design and fabrication of a leak test rig and the recommendations for the improvement of the rig are also included together with this thesis as for instance to design and fabricate a support the leak test rig to statically hold it in place. | |
| 650 | 0 | _aDiesel fuels | |
| 650 | 0 |
_aDiesel motor _xFuel systems |
|
| 999 |
_aVIRTUA40 _c1949 _d1955 |
||
| 999 | _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992 | ||