000 03005nam a2200253 a 4500
001 vtls000045987
003 KUKTEM
005 20251114204434.0
008 100604t2009 my dao f m 000 0 eng d
020 _aTHE0007433(Local)
039 9 _a201905161125
_bfawwaz
_c201107132357
_dVLOAD
_c201011091456
_damelia
_y201006041143
_zFida
040 _aUMP
090 _aTP350 .N49 2009 rs Bc.
100 1 _aNg, Ziet Hong
245 1 0 _aDevelopment of engine management system for modified diesel engine fuelled by compressed natural gas (CNG) /
_cNg Ziet Hong
246 3 _aDevelopment of engine management system for modified diesel engine fuelled by compressed natural gas (CNG)
_h[electronic resource]
260 _aKuantan, Pahang :
_bUMP ,
_c2009
300 _axvii, 118 p. :
_bill. (some col.) ;
_c30 cm. + 1 computer disc
502 _aProject paper (Bachelor of Mechanical Engineering with Manufacturing Engineering) -- Universiti Malaysia Pahang - 2009
520 3 _aAir pollution is a serious global problem. Most country uses diesel engine, which produces substantial amount of emission, for the transportation sector. That is why development of green car is important to solve this problem. Compressed natural gas (CNG) as fuel to run diesel engine is one solution to decrease emission. This thesis deals with the finding of the best air-fuel ratio to be input into the Engine Control Unit (ECU) so that the ECU can manage the engine properly. Simulation of experiment of effect of variable AFR at variable manifold pressure for fixed RPM is run using GT-Power software. Hence a modified single cylinder diesel engine to run on CNG is studied and parameters are taken from the engine to be input into the template library of GT-Power software. In this project, the studied RPM is from 800 RPM to 3000 RPM with increment of 200 RPM. The manifold pressure range from 0.25 Bar to 1.00 Bar with increment of 0.05 Bar. As for the air-fuel ratio (AFR), the range is from 12.5 to 21. The results obtained from the simulation are viewed using GT-Post. The data are then transfer to Microsoft Excel to plot out the graph. From the graph, the best AFR is determined and input into the AFR table of Megatune software and burn into the ECU. Result shows that the engine operate well on lean mixture for all condition. Engine performance curve plotted from the result shows that the trend of curve is the same for all manifold pressure, the only difference is as manifold pressure increase the power output also increases. From published reports and books, it is stated that lean burning of air fuel mixture increases fuel conversion efficiency. Also optimum efficiency from natural gas is obtained when burnt in a lean mixture. It is concluded that the AFR table is successfully inputted with the best AFR at different RPM and manifold pressure.
650 0 _aGas as fuel
650 0 _aCompressed natural gas
999 _aVIRTUA40
_c2041
_d2047
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5200*6500*6501*9992