MARC View

000			02039nam a2200241 a 4500
001			vtls000058115
003			KUKTEM
005			20251114204434.0
008			111230t2011 my da f m 001 0 eng d
020			_aTHE0004218(Local)
039		9	_a201905152034 _bfarhana _y201112301808 _zida
040			_aUMP
090			_aTP159.C3 H39 2011 rs Bc.
100	0		_aNur Hayati Zulkefli
245	1	0	_aPreparation and characterization of cobalt based and zinc promoted catalyst fro fisher tropsch synthesis / _cNur Hayati Zulkefli
260			_aKuantan, Pahang : _bUMP, _c2011
300			_axvii, 58 p. : _bill. ; _c30 cm. + _e1 CD-ROM
502			_aProject paper (Bachelor of Chemical Engineering (Gas Technology)) -- Universiti Malaysia Pahang - 2010
504			_aBibliography : p. 53-54
520	3		_aThe purpose of this research is to compare the characterization of SBA-15 and TiO2 supported cobalt catalyst for Fischer-Tropsch synthesis based on effect of cobalt loading. In order to complete this research, the catalyst must be prepared by incipient wetness impregnation method. The catalysts were prepared with different cobalt loading, which are 5%, 10% and 15% and using zinc as a promoter. To characterize these catalysts, different methods were used. First of all, characterization of SBA-15 and TiO2 were compared by using Fourier Transform Infrared Spectroscopy (FTIR). Then the catalysts were tested using Scanning Electron Microscope (SEM). Through this characterization, the surface of catalysts was compared. The surface structure of Co/SBA-15 is more ordered when compared to Co/TiO2 catalyst. This is compared by the SEM image taken. Therefore, Co/TiO2 is also a good catalyst with advantages when compared to Co/SBA-15 catalyst. The conclusion of this research when comparing the characterization of Co/SBA-15 and TiO2 catalysts, is Co/SBA-15 catalyst is a good catalyst when compared to Co/TiO2 catalyst.
650		0	_aCatalysts
999			_aVIRTUA40 _c2047 _d2053
999			_aVTLSSORT0080020004000900100024502600300050205040520065009992