000			01950nam a2200253 a 4500
001			vtls000065156
003			KUKTEM
005			20251114204434.0
008			121017t2012 my da f m 000 0 eng d
020			_aTHE0007707(Local)
039		9	_a201905241030 _bfawwaz _c201211071132 _dhuda _y201210171507 _ztraining
040			_aUMP
090			_aTS250 .H35 2012 rs Bc.
100	0		_aTuan Abdul Hadi Tuan Jusoh
245	1	0	_aDesign suitable punch or die to overcome springback on u-bending / _cTuan Abdul Hadi Tuan Jusoh
260			_aKuantan, Pahang : _bUMP , _c2012
300			_axviii, 65 p. : _bill. (some col.) ; _c30 cm. + _e1 CD-ROM
502			_aProject paper (Bachelor of Manufacturing Engineering) -- Universiti Malaysia Pahang - 2012
504			_aBibliography : p. 55-56
520			_aThis project deals with the overcoming springback on u bending. Now days, many research and study have been done on a springback. In sheet metal bending, a flat part is bent using a set of punches and dies. The punch and the dies are mounted on a press machine, which control the relative motion between the punch and die and provides the necessary bending pressure. This project is done with simulation of springback using a material of Stainless Steel on U-bending process by using a 1 mm thickness and the size of the specimen is 100 mm x 90 mm. The springback of Stainless Steel sheet was investigated using finite element analysis. Hyperform software is used in this project to simulate the springback of sheet metal in U-bending. The main problem of the bending process is spring-back phenomenon after removing the punch. The aim of this study includes the springback optimization of the part that required U bending processes using the concept of experimental design a suitable punch or dies.
650		0	_aBending
650		0	_aSheet-metal work
999			_aVIRTUA40 _c2056 _d2062
999			_aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992