000 01955nam a2200253 a 4500
001 vtls000058539
003 KUKTEM
005 20251114204437.0
008 120302t2010 my a f m 000 0 eng d
020 _aTHE0004407(Local)
039 9 _a201905161219
_brohana
_y201203021107
_zFida
040 _aUMP
090 _aTP248.25.M45 R69 2010 rs Bc.
100 0 _aRozialfi Alwaner
245 1 0 _aDilute sulfuric acid pretreatment for cellulose recovery from sawdust /
_cRozialfi Alwaner
260 _aKuantan, Pahang :
_bUMP,
_c2010
300 _axiv, 92 p. :
_bill. ;
_c30 cm. +
_e1 CD-ROM
502 _aProject paper (Bachelor of Chemical Engineering (Biotechnology)) -- Universiti Malaysia Pahang - 2010
504 _aBibliography : p. [55]-57
520 3 _aCellulose has much function in producing valuable product such as bioethanol that has the same function with the crude oil and produce using cheaper and abundant raw material (biomass). The biomass that has been used in this research is sawdust. In order to recover cellulose from sawdust, it is necessary to treat the sawdust using dilute sulfuric acid pretreatment as to remove the lignin and hemicelluloses that bonding the cellulose structure. Compared with the untreated sawdust, 3.4 g/l glucose was dissolved from the cellulose, whereas hemicelluloses which are xylose and arabinose in pre-treated sawdust decreased to 2.5 g/l and 6.8 g/l, respectively. The results of infrared spectra (IR) and scanning electron microscope (SEM) analysis also showed that the structure and the surface of the sawdust were changed through pretreatment and crystalline cellulose in sawdust pretreated was disrupted. The maximum cellulose recovery of sawdust was achieved at a sulfuric acid concentration of 4 % and pretreatment time of 120 minutes.
650 0 _aMembrane reactors
650 0 _aCellulose
999 _aVIRTUA40
_c2147
_d2153
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992