000 02208nam a2200265 a 4500
001 vtls000051663
003 KUKTEM
005 20251114204438.0
008 110304t2010 my a f m 000 0 eng d
020 _aTHE0005886(Local)
039 9 _a201905141149
_baida
_c201107140036
_dVLOAD
_y201103041659
_zida
040 _aUMP
090 _aTA462 .Z85 2010 rs Bc.
100 0 _aAhmad Zul Hafiz Ramli
245 1 0 _aEffect of heat treatment on the corrosion resistance of aluminium alloys /
_cAhmad Zul Hafiz Ramli
246 3 _aEffect of heat treatment on the corrosion resistance of aluminium alloys
_h[electronic resource]
260 _aKuantan, Pahang :
_bUMP,
_c2010
300 _axviii, 77 p. :
_bill. (some col.) ;
_c30 cm. +
_e1 computer disc
502 _aProject paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2010
504 _aBibliography : p. 67-69
520 3 _aAluminium alloy 5083 is commonly used in the ships and boats in the marine environment and susceptible to corrosion when they are run at high speed velocity and high flow rate condition. The purpose of this study is to investigate the effect of solution heat treatment on the corrosion resistance of aluminium alloys by using aluminium 5083 as a material for the experiments. The objective of this study is to investigate the corrosion resistance by differing the aging time during solution heat treatment process and to determine the corrosion rate by using immersion test method. The microstructures of heat treated specimens have been observed using metallurgical microscope and scanning electron microscope while the hardness test has been done using Vickers hardness tester. The corrosion rates of the heat treated specimens were determined using weight loss method. The corrosion resistance of heat treated specimens increased after solution heat treatment while the hardness of the specimens slightly decreased. The type of corrosion occurred on the surface of specimens were found to be uniform corrosion
650 0 _aAluminium alloys
_xCorrosion
650 0 _aCorrosion and anti-corrosives
999 _aVIRTUA40
_c2160
_d2166
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5040*5200*6500*6501*9992