| 000 | 02708nam a2200265 a 4500 | ||
|---|---|---|---|
| 001 | vtls000051771 | ||
| 003 | KUKTEM | ||
| 005 | 20251114204439.0 | ||
| 008 | 110309t2010 my a f m 000 0 eng d | ||
| 020 | _aTHE0007704(Local) | ||
| 039 | 9 |
_a201905241028 _bfawwaz _c201107140037 _dVLOAD _c201103241117 _dida _c201103091106 _dida _y201103091104 _zida |
|
| 040 | _aUMP | ||
| 090 | _aTS250 .A45 2010 rs Bc. | ||
| 100 | 0 | _aChe Amir Rajhan Che Jaffar | |
| 245 | 1 | 0 |
_aSpringback prediction of mild steel sheet on L-bending / _cChe Amir Rajhan Che Jaffar |
| 246 | 3 |
_aSpringback prediction of mild steel sheet on L-bending _h[electronic resource] |
|
| 260 |
_aKuantan, Pahang : _bUMP, _c2010 |
||
| 300 |
_axiv, 41 p. : _bill. (some col.) ; _c30 cm.+ _e1 computer disc |
||
| 502 | _aProject paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2010 | ||
| 504 | _aBibliography : p. 39 | ||
| 520 | 3 | _aThis report deals with deformation analysis of springback in L-bending of sheet metal. Nowadays, many softwares is produced to investigate about the springback in sheet metal bending. These softwares is getting applicable and useful from time to time. Mastering this software will make the industry especially manufacturing industry know the element and condition of materials and appropriate bending process for such material in order to manage the company production cost. This report is done with simulation of springback using a material of Mild Steel on L-bending process and also an experiment of L-bending is conducted using a 1 mm thickness. The springback of Mild Steel sheet was investigated using finite element analysis. Abaqus software is used in this project to simulate the springback of sheet metal in L-bending. The value of 0.5 mm mesh is used for the simulation. In this simulation the die and pressure pad is declared as contact with the workpiece and friction was defined with 0.1. Punch is also declared as contact with the workpiece and it was defined as frictionless. Then the nodes were taken and import to Auto Cad software to measure the angle of springback from the simulation. An experiment of ten specimens of Mild Steel sheet were conducted in this experiment and the result were taken. Thickness of 1 mm was used for the experiment for all specimens. Profile Projector machine is used to measure the angle of the ten specimens. The result from the experiment will be compared to the result of simulation. The result of this report show the springback in simulation 2o and the result of experiment is 2.3o. | |
| 650 | 0 | _aSheet-metal work | |
| 650 | 0 | _aBending | |
| 999 |
_aVIRTUA40 _c2192 _d2198 |
||
| 999 | _aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5040*5200*6500*6501*9992 | ||