000 02184nam a2200265 a 4500
001 vtls000052081
003 KUKTEM
005 20251114204440.0
008 110317t2010 my da f m 000 0 eng d
020 _aTHE0007307(Local)
039 9 _a201905141441
_bfawwaz
_c201110041227
_dFida
_c201107140039
_dVLOAD
_c201103171233
_dida
_y201103171220
_zida
040 _aUMP
090 _aTL262 .M33 2010 rs Bc.
100 0 _aMaaruf Muhamad
245 1 0 _aDesign and development of transmission for two-seated urban car /
_cMaaruf Muhamad
246 3 _aDesign and development of transmission for two-seated urban car
_h[computer file]
260 _aKuantan, Pahang :
_bUMP,
_c2010
300 _axii, 55 p. :
_bill. (some col.) ;
_c30 cm. +
_e1 computer disc
502 _aProject paper (Bachelor of Mechanical Engineering with Automotive Engineering) -- Universiti Malaysia Pahang - 2010
504 _aBibliography : p. 47
520 3 _aThis thesis is aim on designing and customizes the transmission from 4 stroke Modenas Kriss 110cc engine to be used in two seated urban car. Design requirement followed by the rules of the Eco-challenge marathon race. The suitable gear is to be identified and selected because of the transmission is decided to use only single gear ratio that suitable and the power produce must be approximate nearly to the power required to avoid losses. It‟s important because the design of two seated urban car required the participant to design and development two seated urban car that have low fuel consumption. The design will carry out to produce power that approximate enough to the required power and also have a suitable design for two seated urban car that will be design. In this thesis the result to use a single gear ratio is chosen. This is because of the result from the analysis by calculation showed that power produce is near to the power required to move the car. Then finally this condition can make the car running as efficient as possible.
650 0 _aAutomobiles
_xTransmission devices
650 0 _aMotor vehicles
_xTransmission devices
999 _aVIRTUA40
_c2213
_d2219
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5040*5200*6500*6501*9992