| 000 | 02226nam a2200265 a 4500 | ||
|---|---|---|---|
| 001 | vtls000051957 | ||
| 003 | KUKTEM | ||
| 005 | 20251114204441.0 | ||
| 008 | 110314t2010 my da f m 000 0 eng d | ||
| 020 | _aTHE0006199(Local) | ||
| 039 | 9 |
_a201905151729 _baida _c201107140038 _dVLOAD _y201103141622 _zida |
|
| 040 | _aUMP | ||
| 090 | _aTJ230 .F37 2010 rs Bc. | ||
| 100 | 0 | _aFara Farhana Abdul Basek | |
| 245 | 1 | 0 |
_aDesign and development of orange peeler : _ban ergonomics approach / _cFara Farhana Abdul Basek |
| 246 | 3 |
_aDesign and development of orange peeler _h[electronic resource] : _ban ergonomics approach |
|
| 260 |
_aKuantan, Pahang : _bUMP, _c2010 |
||
| 300 |
_axv, 76 p. : _bill. (some col.) ; _c30 cm. + _e1 computer disc |
||
| 502 | _aProject paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2010 | ||
| 504 | _aBibliography : p.58-59 | ||
| 520 | 3 | _aThis thesis deals with the design and development of an orange peeler with an ergonomics approach. The objectives of this thesis are to design an orange peeler with an ergonomics approach by using SolidWork and simulate by using ALGOR. The purpose for this study is to prevent the musculoskeletal disorder problems when peeling orange. The scope of this project is that the validation of the orange peeler through simulation software is considered precise. As for methodology, the design is based on data from literature review and manual calculation. The design will justify the ergonomics principle and the finite element analysis was performed. The finite element model of design was analyzed using Static Stress with Linear Material Models. Two designs of orange peelers were constructed. The result comes out that peeler A has higher Stress von Misses than peeler B. From the result, it is observed that the designs still lacks in many parts in order to approach the ergonomics criteria. As a conclusion, objectives for the simulation is achieved with comparing the two designs. Thus, the conclusion is based on the literature review, the designed is ergonomics. | |
| 650 | 0 | _aMachine design | |
| 650 | 0 | _aHuman engineering | |
| 999 |
_aVIRTUA40 _c2251 _d2257 |
||
| 999 | _aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5040*5200*6500*6501*9992 | ||