000 02609nam a2200277 a 4500
001 vtls000052447
003 KUKTEM
005 20251114204443.0
008 110329t2010 my a f m 000 0 eng d
020 _aTHE0006281(Local)
039 9 _a201905171135
_baida
_c201110041129
_dFida
_c201107140041
_dVLOAD
_c201103291240
_dida
_y201103291238
_zida
040 _aUMP
090 _aTJ438 .H36 2010 rs Bc.
100 0 _aMohd Hanif Ab Hamid
245 1 0 _aEnergy loss through the steam trap in a steam system /
_cMohd Hanif Ab Hamid
246 3 _aEnergy loss through the steam trap in a steam system
_h[computer file]
260 _aKuantan, Pahang :
_bUMP,
_c2010
300 _axv, 56 p. :
_bill. (some col.) ;
_c30 cm. +
_e1 computer disc
502 _aProject paper (Bachelor of Mechanical Engineering with Manufacturing Engineering) -- Universiti Malaysia Pahang - 2010
504 _aBibliography : p. 53
520 3 _aݼ浐Ô thesis is about the energy loss through the steam trap in the steam system. In industry, steam traps frequently fail but they are not noticed except when they are leaking. If steam trap fail in failed open, live steam can escape to surrounding. High amount of energy will loss from the steam system. It takes weeks or months before it being repaired or replaced. The first objective of this study is to measure the heat loss for normal thermodynamic steam trap in respond to operating pressure for different condensate load. The second objective is to measure the heat loss for failed open thermodynamic steam trap in respond to operating pressure for different condensate load. The last objective is to compare energy loss between normal and failed open steam trap. From the last objective, the actual energy loss if failed steam trap is not repaired is determined. Thermodynamic steam trap has been tested in the experiment and the operating pressure is below 1 bar. Condensate that discharges from steam trap is collected to record the reading of its temperature and weight. These data is used to determine the energy loss through the steam trap. For normal steam trap, energy loss for high condensate load is higher than low condensate load. For failed open steam trap, energy loss for high condensate load is lower than low condensate load. Finally, after comparing the result, steam system that has low condensate load has higher energy loss compare to high condensate load.
650 0 _aSteam-traps
650 0 _aSteam engineering
650 0 _aThermodynamics
999 _aVIRTUA40
_c2301
_d2307
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5040*5200*6500*6501*6502*9992