000 02015ntm a2200253 a 4500
001 vtls000082977
003 KUKTEM
005 20251114204443.0
008 141104t2013 my da f m 000 0 eng d
020 _aTHE0006620(Local)
039 9 _a201905161256
_bamirul
_c201411041214
_dFida
_c201411041208
_dFida
_y201411041208
_zFida
040 _aUMP
090 _aTJ1227 .M84 2013 r Bc.
100 0 _aNik Muhamad Firdaus Nik Salahuddin
245 1 0 _aModal analysis on cnc milling cutting tool /
_cNik Muhamad Firdaus Nik Salahuddin
260 _aKuantan, Pahang :
_bUMP ,
_c2013
300 _axvii, 74 p. :
_bill. (some col.) ;
_c30 cm. +
_e1 CD-ROM
502 _aProject paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2013
504 _aBibliography : p. 72-73
520 3 _aTo date, milling is one of the most common manufacturing process for manufacturing sectors, aerospace, and tool and dies industries. In this project, the main objective is to study the dynamic properties and behaviour of the CNC milling cutting tool. The method used is using finite element analysis and the validation of results obtained using experimental modal testing. Firstly, the structural threedimensional solid modelling of the selected CNC cutting tool draw before analysed using the linear modal analysis approach. After that, the experimental modal testing was performed using Modal Impact Hammer Testing method. The natural frequency of the mode shape is determined and comparative study was done from both method results. The results of this project shown the mode shape simulation of experimental data are totally not same but generally is in agreement with the finite element analysis. It is concluded that the experimental method uses vertical milling machines as test rig and the difference mass of cutting tool affected the result.
650 0 _aMilling cutters
650 0 _aMilling-machines
999 _aVIRTUA40
_c2318
_d2324
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992