000 02661nam a2200253 a 4500
001 vtls000052496
003 KUKTEM
005 20251114204445.0
008 110330t2010 my a f m 000 0 eng d
020 _aTHE0005738(Local)
039 9 _a201905221017
_bhanafiah
_c201110041137
_dFida
_c201107140042
_dVLOAD
_y201103301044
_zida
040 _aUMP
090 _aTA418.24 .M37 2010 rs Bc.
100 0 _aMohd Marhan Asari
245 1 2 _aA study on heat treatment of carburizing carbon steel /
_cMohd Marhan Asari
246 3 _aA study on heat treatment of carburizing carbon steel
_h[computer file]
260 _aKuantan, Pahang :
_bUMP,
_c2010
300 _aix, 53 p. :
_bill. (some col.) ;
_c30 cm. +
_e1 computer disc
502 _aProject paper (Bachelor of Mechanical Engineering with Manufacturing Engineering) -- Universiti Malaysia Pahang - 2010
504 _aBibliography : p. 49-50
520 3 _aThe main purpose of this study is to study the effect of heat treatment of carburizing carbon steel by using three parameters (carburizing hour, carburizing temperature, and quenching medium). This study was conducted using a furnace. This process is carried out at temperatures from 850°C to 950°C (1123 – 1223K) for three various duration time which are 8, 10 and 12 hours. From the experiment, the thickness of carbon layer varied according to the parameters that been used. For carburizing temperature at 950°C, the thickness of carbon layer was between 40μm to 80μm for oil as quenching medium, 60μm to 100μm for water as quenching medium and 20μm to 60μm for air as quenching medium. This experiment also been conducted for different carburizing temperature but with one quenching medium which is oil. The thickness of carbon layer was between 20μm to 60μm for 850°C, 30μm to 70μm for 900°C and 40μm to 80μm for 950°C. For carburizing temperature at 950°C, surface hardness values of carburized specimens were between 185.9 HV and 386.2 HV for oil as quenching medium, 234.7 HV and 398.4 HV for water as quenching medium and 120.7 HV and 241.5 HV for air as quenching medium. For different carburizing temperature, surface hardness values of carburized specimens were between 149 HV and 323.4 HV for 850°C, 166.4 HV and 345.9 HV for 900°C and 185.9 HV and 368.2 HV for 950°C. Activation energy was determined by 47.34 kJ/mol. The lower value of activation energy means less energy required for carbon atoms to diffuse into carbon steel, thus provide a more effective and efficient process.
650 0 _aSteel
_xHeat treatment
999 _aVIRTUA40
_c2357
_d2363
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5040*5200*6500*9992