000			02025nam a2200265 a 4500
001			vtls000052523
003			KUKTEM
005			20251114204446.0
008			110330t2010 my a f m 000 0 eng d
020			_aTHE0006637(Local)
039		9	_a201905161453 _bamirul _c201110041132 _dFida _c201107140042 _dVLOAD _y201103301436 _zida
040			_aUMP
090			_aTJ1280 .A23 2010 rs Bc.
100	0		_aAbd Faiz Muhammad
245	1	0	_aEffect of abrasive tools on surface finishing when grinding mild steel / _cAbd Faiz Muhammad
246	3		_aEffect of abrasive tools on surface finishing when grinding mild steel _h[computer file]
260			_aKuantan, Pahang : _bUMP, _c2010
300			_axii, 66 p. : _bill. (some col.) ; _c30 cm. + _e1 computer disc
502			_aProject paper (Bachelor of Mechanical Engineering with Manufacturing) -- Universiti Malaysia Pahang - 2010
504			_aBibliography : p. [79]-61
520	3		_aThe main purpose of this study is to study the effects of abrasive tools on mild steel surface by using three parameters (depth of cut, table speed, and mode of dressing). This study was conducted by using surface grinding machine. Taguchi method was employed as an analysis tool for this study. Total series of experiments performed was 9 set for each grinding wheels (Silicon Carbide and Aluminium Oxide). Statistical software was used to predict the surface roughness. To validate the prediction result, experimental values compared. Result showed that lower depth of cut, lower table speed and lower mode of dressing produced better surface finish. For the abrasive tools used, the Aluminium Oxide wheel produced lower value of surface roughness compared with the Silicon Carbide wheel. The predicted result showed that depth of cut, table speed and dressing mode are significant parameter in influencing of surface roughness.
650		0	_aGrinding and polishing
650		0	_aAbrasives
999			_aVIRTUA40 _c2391 _d2397
999			_aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5040*5200*6500*6501*9992