| 000 | 02417nam a2200253 a 4500 | ||
|---|---|---|---|
| 001 | vtls000052699 | ||
| 003 | KUKTEM | ||
| 005 | 20251114204448.0 | ||
| 008 | 110408t2010 my a f m 000 0 eng d | ||
| 020 | _aTHE0007391(Local) | ||
| 039 | 9 |
_a201905151144 _bfawwaz _c201107140044 _dVLOAD _y201104081221 _zida |
|
| 040 | _aUMP | ||
| 090 | _aTL782 .K36 2010 rs Dip. | ||
| 100 | 0 | _aTg Kamarul Azhan Tg Kamaruddin | |
| 245 | 1 | 0 |
_aDesign and fabricate rocket engine / _cTg Kamarul Azhan Tg Kamaruddin |
| 246 | 3 |
_aDesign and fabricate rocket engine _h[electronic resource] |
|
| 260 |
_aKuantan, Pahang : _bUMP, _c2010 |
||
| 300 |
_axiii, 47 p. : _bill. (some col.) ; _c30 cm. + _e1 computer disc |
||
| 502 | _aProject paper (Diploma in Mechanical Engineering) -- Universiti Malaysia Pahang - 2010 | ||
| 504 | _aBibliography : p. 45 | ||
| 520 | 3 | _aThe objective of this project is to design and fabricate the Rocket Engine.This project describe the shape of Rocket that will fabricate follow the dimension that give by my supervisor.Actually there a several type of Rocket Engine.There are Rocket Engine based of thermal,water,hybrid,solid,and resistojet(electronic).So,the Rocket that will fabricate is from the solid type.One of the important thing a rocket is type of noozle,from the research in the internet De’Laval Noozle is the better type of noozle to use.Then material also another important thing in making Rocket.Material that will use must have good enough strenght to hold the explosion that will happen to move up the rocket.The better material is Stainless Steel it is light and have a good strenght,but cause of limited soucrce the material that use for make this Rocket is from mild steel.It is also have good strenght but it heavy than stainless steel.This project start from making the design and make it using Solid Work Software.Finish the design then the rocket can be made use a Lathe Machnine.Majority this rocket will be made by Lathe Machine.But from the start of fabricte the machine that involve also like bendsaw and drilling machine.Rocket engine that will be made have three part.First part is cap to close the hole on the upper body,a body and noozle.All this part will be assembly and were tied by bolt.It was susessfully done and able to function as needed. | |
| 650 | 0 | _aRocket engines | |
| 999 |
_aVIRTUA40 _c2440 _d2446 |
||
| 999 | _aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5040*5200*6500*9992 | ||