000			02878nam a2200253 a 4500
001			vtls000040470
003			KUKTEM
005			20251114204455.0
008			090716t2008 my a f m 000 0 eng|d
020			_aTHE0007251(Local)
039		9	_a201905141058 _bfawwaz _c201107132306 _dVLOAD _c200908141649 _dVLOAD _c200908141629 _dVLOAD _y200907161513 _zida84
040			_aUMP
090			_aTL255 .F57 2008 rs Bc.
100	0		_aMuhammad Firdaus Mahmud
245	1	0	_aImprovement of front car bumper system / _cMuhammad Firdaus Mahmud
246	3		_aImprovement of front car bumper system _h[electronic resource]
260			_aKuantan, Pahang : _bUMP, _c2008
300			_a50 p. : _bill. (some col.) ; _c30 cm. + _e1 computer disc
502			_aProject paper (Bachelor of Mechanical Engineering with Automotive) -- Universiti Malaysia Pahang - 2008
520	3		_aDesigning the bumper with the focus on an improvement aspect is very important in the automotive industry. The goals are to increase the performance of the bumper and also to find the solution to reduce the cost of the bumper hence able to reduce the production cost. The costs of the bumper is high because of the amount of material used and it also involves many processes including making the grille at the center of bumper. The new design considers on reducing the amount of material use and also eliminating the process involve in manufacture the bumper for example eliminating the grille attachment. The new design also must improve the ability to absorb more impact load and increase the protection of the front car component. This project intention is to design an improved of front car bumper and to find the solution for the problem of high cost and the replacing cost for the front bumper and lastly emphasizing the cost reducing aspect. The method have been employed was study the front bumper system, design and analyze the alternative front bumper using CAD software. The suitable material that can be used as the bumper in terms of economical but still maintaining the toughness is Plastic-Polycarbonate (Molded) which is not expensive compare to the best material from the analysis E-Glass Fiber, Plastic-Nylon Type 6/6 and Plastic ABS (Molded). The suitable material to be use for making beam is AISI E 52100 Steel. Rearrangement of the mounting positions gives a different effect on the ability to withstand the impact force. Additional plate in the improvement design proved increasing the toughness of the beam
650		0	_aAutomobiles _xBumpers _xDesign and construction
650		0	_aAutomobiles _xSafety appliances
999			_aVIRTUA40 _c2647 _d2653
999			_aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5200*6500*6501*9992