000 02687nam a2200277 a 4500
001 vtls000045859
003 KUKTEM
005 20251114204456.0
008 100520t2009 my a f m 000 0 eng d
020 _aTHE0006513(Local)
039 9 _a201905141443
_bamirul
_c201107132320
_dVLOAD
_y201005201530
_zida
040 _aUMP
090 _aTJ1185 .M44 2009 rs Bc.
100 0 _aMeera Belly
245 1 0 _aInvestigation of cutting parameters effect on surface roughness in turning operation of pure aluminum /
_cMeera Binti Belly
246 3 _aInvestigation of cutting parameters effect on surface roughness in turning operation of pure aluminum
_h[electronic resource]
260 _aKuantan, Pahang :
_bUMP,
_c2009
300 _axvi, 52 p. :
_bill. ;
_c30 cm. +
_e1 computer disc
502 _aProject paper (Bachelor of Mechanical Engineering with Manufacturing Engineering) -- Universiti Malaysia Pahang - 2009
504 _aBibliography : p. 46-47
520 3 _aRoughness plays a significant role in determining and evaluating the surface quality of a product. It is because surface roughness affects the functional characteristics of products. Quality measure and surface roughness in mechanical parts depends on turning parameters during turning process. This study focuses on effects of cutting parameters such as cutting speed and depth of cut on surface roughness quality during turning operation of pure aluminium. The most optimum condition of the controlled parameter will also be studied. Using Taguchi approach, nine experiments has been carried out and with further S/N ratio method, the optimum condition of each parameter is known. A predictive equation based on ANOVA was produced to determine the selected controlled parameters and predictive equation were accurate to within the limits of the measurement instrument. Based on result analysis, the most optimum condition for machining of pure aluminium using lathe machine is the lowest level of depth of cut with the highest level of cutting speed. Besides that, using ANOVA approach, depth of cut was selected as the most significant factor in this study. It gives the highest effect on surface roughness compared to cutting speed. However, some recommendation can be made to improve the details of this study such as using the suitable cutting speed for aluminium and using a better precision perthometer. As a conclusion, this area of research would benefit for future studies especially in industrial environment.
650 0 _aSurface roughness
650 0 _aMetal-cutting
650 0 _aMachining
999 _aVIRTUA40
_c2682
_d2688
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5040*5200*6500*6501*6502*9992