000 03096nam a2200277 a 4500
001 vtls000045554
003 KUKTEM
005 20251114204500.0
008 100505t2009 my ao f m 000 0 eng d
020 _aTHE0007646(Local)
039 9 _a201905171206
_bfawwaz
_c201107132317
_dVLOAD
_y201005051212
_zida
040 _aUMP
090 _aTS178.4 .F35 2009 rs Bc.
100 0 _aMuhammad Faizulhidi Abd Manan
245 1 0 _aDevelopment of fitting code software for assembly parts /
_cMuhammad Faizulhidi Bin Abd Manan
246 3 _aDevelopment of fitting code software for assembly parts
_h[electronic resource]
260 _aKuantan, Pahang :
_bUMP,
_c2009
300 _axiii, 59 p. :
_bill. (some col.) ;
_c30 cm. +
_e1 computer disc
502 _aProject paper (Bachelor of Mechanical Engineering with Manufacturing) -- Universiti Malaysia Pahang - 2009
504 _aBibliography : p. 41-42
520 3 _aThis project described about the process developement of fitting code software for assembly parts that user friendly in Small and Medium Entreprise field. Selection of fits based on what the industry commonly use which is hole-basis system and shaft-basis system. Type of fits include in this software are clearance fit, transition fit and interference fit. The programming language such as Microsoft’s Visual Basic.NET 2003 is used to develop this software. Fitting Code Software for Assembly Parts is standalone system that Microsoft Visual Basic.Net 2003 as the platform to develop interface and coding for this system. The source code that used in developing this system is capable with the interface and database structure. Based on the observations, fitting code are usually use in designing stage of manufacture hole and shaft. The fitting code contains the standard information oftolerances, allowance, limits and clearance for the assembly part. However, the aim of this work is only to develop the Fitting Code Software for assembly parts that will be applied for Shaft Basis System and Hole Basis System. It has some constraints in develop the software which are development constraints and system limitations. To enable user fill their own basic sizes, a large amount of data is required to store into the database. By using basic size of diameter as primary key, user are able to get the tolerance value and the value of maximum and minimum clearance or interference based on fit type they select. The limitations that have been faced are when this software used for other types of basis system rather than hole-basis and shaft-basis system since this software contains information on these two systems only. However, there is also some advantages of this software which are this software is a free version and very users friendly since the users only need to type the basic size and the results will appear as they want.
650 0 _aProduction planning
_xComputer program
650 0 _aManufacturing processes
650 0 _aComputer software
_xDevelopment
999 _aVIRTUA40
_c2795
_d2801
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5040*5200*6500*6501*6502*9992