000 02435nam a2200265 a 4500
001 vtls000052403
003 KUKTEM
005 20251114204501.0
008 110328t2010 my a f m 000 0 eng d
020 _aTHE0005779(Local)
039 9 _a201905101611
_baida
_c201110041116
_dFida
_c201107140041
_dVLOAD
_c201103281654
_dida
_y201103281618
_zida
040 _aUMP
090 _aTA418.7 .M84 2010 rs Bc.
100 0 _aMohd Muhyiddin Ibrahim
245 1 0 _aOptimization of cylindrical grinding parameter for the high product quality subject to roundness constraint /
_cMohd Muhyiddin Ibrahim
246 3 _aOptimization of cylindrical grinding parameter for the high product quality subject to roundness constraint
_h[computer file]
260 _aKuantan, Pahang :
_bUMP,
_c2010
300 _axiv, 69 p. :
_bill. (some col.) ;
_c30 cm. +
_e1 computer disc
502 _aProject paper (Bachelor of Mechanical Engineering with Manufacturing Engineering) -- Universiti Malaysia Pahang - 2010
504 _aBibliography : p. 57-59
520 3 _aIn the manufacturing cylinder rod industry, final roundness of a product is very important to determine the products quality. Good roundness not only ensures good quality, but also reduces manufacturing costs. Final roundness is a important aspect of tolerance, it reduce installation time and reduce operating hours at the same time to reduce the overall cost. In this study, the main objective is to study the effect of work piece diameter, work speed and cutting depth of the roundness error in the process of cylindrical grinding by using outside cylindrical grinding machines. Roundness errors measure by using roundness measuring machine. The results of experimental analyze by using statistical methods with the help of DOE software. Based DOE method, the experiment was run by using the full factorial method and the results were analyzed using the Statistica software. The correlation for roundness error with the cutting parameters satisfies a reasonable degree of approximation. Depth of cut is the most significant parameter in affecting the roundness error work piece. The optimal parameters are, for work piece diameter is 18.71mm, for speed is 74.96rev/min and for depth of cut is 15.91μm.
650 0 _aSurface (Technology)
_xMeasurement
650 0 _aRoundness measurement
999 _aVIRTUA40
_c2810
_d2816
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2460*2600*3000*5020*5040*5200*6500*6501*9992