000 02779nam a2200253 a 4500
001 vtls000051893
003 KUKTEM
005 20251114204505.0
008 110314t2010 my a f m 000 0 eng d
020 _aTHE0006183(Local)
039 9 _a201905151710
_baida
_c201204090856
_dFida
_c201110040852
_dFida
_c201107140038
_dVLOAD
_y201103141055
_zida
040 _aUMP
090 _aTJ223.P76 S24 2010 rs Bc.
100 0 _aMohammad Safuan Sheafi
245 1 0 _aApplication of microcontroller to control pneumatic actuator /
_cMohammad Safuan Sheafi
260 _aKuantan, Pahang :
_bUMP,
_c2010
300 _axvi, 68 p. :
_bill. (some col.) ;
_c30 cm.+
_e1 CD-ROM
502 _aProject paper (Bachelor of Mechanical Engineering) -- Universiti Malaysia Pahang - 2010
504 _aBibliography : p. 63-64
520 3 _aPneumatics Technology is capable of utilizing the compressed air to perform work and to organize functions. Pneumatic actuator, which is one of the elements in pneumatic system, has been recognized for its flexibility to do various types of work and its capability in diversity of applications. Commonly known controller to control the pneumatic system movements is Programmable Logic Controller (PLC). However, the cost of PLC is expensive for small automation system and it size basis can be consider large as a controller. To overcome this problem, there is a new thought to use Programmable Interface Controller (PIC) which is smaller and cheaper to replace PLC. Main purpose of this project is to make the idea alive. This project will mainly concerned on controlling the sequence of the three linear double-acting cylinder actuator movements by using microcontroller PIC 18F452 coupled with pneumatic solenoid valve. This microcontroller is used for controlling predefined sequences of opening and closing of solenoid valves that will activate the actuator. A program in MikroC PRO is written and developed to communicate with the microcontroller as to move the actuator according to plan sequences. For purpose of voltage regulation, a single-pole double throw (SPDT) relays are used as “OUTPUT” signal from the sensor for the microcontroller. The “OUTPUT RELAY” is of the 6V SPDT powered from the switching output voltage 5V dc of the microcontroller to convey the 24V dc to control the solenoid pneumatic valve. The application that is going to be developed must be in a low cost and a small scale basis. Subsequently, experimental simulation tests will be conducted to evaluate the response and accuracy behaviour of the microcontroller interacting with the solenoid valves.
650 0 _aPneumatic control
650 0 _aProgrammable controllers
999 _aVIRTUA40
_c2929
_d2935
999 _aVTLSSORT0080*0200*0400*0900*1000*2450*2600*3000*5020*5040*5200*6500*6501*9992